Publikationen

M. Brod, A. Dean, R. Rolfes (2021): Numerical Life Prediction of Unidirectional Fiber Composites under Block Loading Conditions using a Progressive Fatigue Damage Model,  International Journal of Fatigue, 2021, 106159
DOI: https://doi.org/10.1016/j.ijfatigue.2021.106159

A. Dean, J. Reinoso, N.K. Jha, E. Mahdi, R. Rolfes (2020): A phase field approach for ductile fracture of short fibre reinforced composites,  Theoretical and Applied Fracture Mechanics Volume 106, April 2020, 102495
DOI: 10.1016/j.tafmec.2020.102495

A. Haldar, E. Jansen, B. Hofmeister, M. Bruns and R. Rolfes (2020): Analysis of Novel Morphing Trailing Edge Flap Actuated by Multistable Laminates,  AIAA Journal, Volume 58, Pages 3149 - 3158
DOI: https://doi.org/10.2514/1.J058870

C. Gerendt, A. Dean, T. Mahrholz, N. Englisch, S. Krause, R. Rolfes (2020): On the progressive fatigue failure of mechanical composite joints: Numerical simulation and experimental validation,  Composite Structures Volume 248, 15 September 2020, 112488
DOI: https://doi.org/10.1016/j.compstruct.2020.112488

C. Hübler (2020): Global sensitivity analysis for medium-dimensional structural engineering problems using stochastic collocation,  Reliability Engineering and System Safety, Volume 195, Page 106749
DOI: 10.1016/j.ress.2019.106749

C. Hübler, F. Müller, R. Rolfes (2020): Polymorphic uncertainty in met-ocean conditions and the influence on fatigue loads,  Journal of Physics: Conference Series, 1669, 012005

C. Hübler, J.-H. Piel, C. Stetter, C. G. Gebhardt, M. H. Breitner, R. Rolfes (2020): Influence of structural design variations on economic viability of offshore wind turbines: An interdisciplinary analysis,  Renewable Energy, Volume 145, Pages 1348-1360
DOI: 10.1016/j.renene.2019.06.113

C. Hübler, R. Rolfes (2020): Analysis of the influence of climate change on the fatigue lifetime of offshore wind turbines using imprecise probabilities,  Wind Energy

C.G. Gebhardt, I. Romero, R. Rolfes (2020): A new conservative/dissipative time integration scheme for nonlinear mechanical systems,  Computational Mechanics, volume 65, pages 405–427
DOI: 10.1007/s00466-019-01775-3

Elsadig Mahdi and Aamir Dean (2020): The Effect of Filler Content on the Tensile Behavior of Polypropylene/Cotton Fiber and poly(vinyl chloride)/Cotton Fiber Composites,  MDPI (This article belongs to the Special Issue Advances in Natural Fibers and Polymers), Materials, 2020.
DOI: /10.3390/ma13030753

F. Alkhatib, E. Mahdi, A. Dean (2020): Crushing response of CFRP and KFRP composite corrugated tubes to quasi-static slipping axial loading: experimental investigation and numerical simulation,  Composite Structures Volume 246
DOI: 10.1016/j.compstruct.2020.112370

F.Alkhatib, E.Mahdi, A.Dean (2020): Development of composite double-hat energy absorber device subjected to traverser loads,  Composite Structures, Available online 15 February 2020, 112046,
DOI: https://doi.org/10.1016/j.compstruct.2020.112046

I. Romero, C. G. Gebhardt (2020): Variational principles for nonlinear Kirchhoff rods,  Acta Mechanica, volume 231, pages 625–647
DOI: 10.1007/s00707-019-02562-0

M. Brod, A. Dean, S. Scheffler, C. Gerendt, R. Rolfes (2020): Numerical Modeling and Experimental Validation of Fatigue Damage in Cross-Ply CFRP Composites under Inhomogeneous Stress States,  Composites Part B: Engineering, 2020, 108050
DOI: https://doi.org/10.1016/j.compositesb.2020.108050

M. Henkel, J. Häfele, W. Weijtjens, C. Devriendt, C. G. Gebhardt, R. Rolfes (2020): Strain estimation for offshore wind turbines with jacket substructures using dual-band modal expansion,  Marine Structures, volume 71, 102731
DOI: 10.1016/j.marstruc.2020.102731

M.Böhm, A.Robertson, C.Hübler, R.Rolfes, P.Schaumann (2020): Optimization-based calibration of hydrodynamic drag coefficients for a semisubmersible platform using experimental data of an irregular sea state,  Journal of Physics: Conference Series, 1669, 012023

N. Noppe, C. Hübler, C. Devriendt, W. Weijtjens (2020): Validated extrapolation of measured damage within an offhore wind farm using instrumented fleet leaders,  Journal of Physics: Conference Series, Volume 1618, Page 022005

R. Berger, B. Hofmeister, C. G.Gebhardt, R. Rolfes (2020): A two-objective design optimisation approach for blending repairs of damaged compressor blisks,  Aerospace Science and Technology, Volume 105, October 2020, 106022
DOI: 10.1016/j.ast.2020.106022

R. Berger, M. Bruns, A. Ehrmann, A. Haldar, J. Häfele, B. Hofmeister, C. Hübler, R. Rolfes (2020): EngiO – Object-oriented Framework for Engineering Optimization,  Advances in Engineering Software, 153, 102959

Robin Unger, Behrouz Arash, Wibke Exner, Raimund Rolfes (2020): Effect of temperature on the viscoelastic damage behaviour of nanoparticle/epoxy nanocomposites: Constitutive modelling and experimental validation,  Polymer Volume 191, 16 March 2020, 122265
DOI: 10.1016/j.polymer.2020.122265

van den Broek, Sander; Minera, Sergio; Pirrera, Alberto; Weaver, Paul M; Jansen, Eelco; Rolfes, Raimund; (2020): Enhanced Deterministic Performance of Panels Using Stochastic Variations of Geometry and Material,  AIAA Journal, pp. 1–14
DOI: 10.2514/1.J058962

A. Dean, N. Grbic, R. Rolfes, A. Behrens (2019): Macro-mechanical Modeling and Experimental Validation of Anisotropic, Pressure- and Temperature-dependent Behavior of Short Fiber Composites,  Composite Structures 211, 630–643
DOI: 10.1016/j.compstruct.2018.12.045

A. Dean, N. Grbic, R. Rolfes, S. Hübner, A. Behrens (2019): A FEM-based Virtual Test-rig for Hybrid Metal-Composites Clinching Joints,  Material Science and Engineering Technology 50, 973-986

A. Dean, N. Safdar, R. Rolfes (2019): A Co-Rotational Based Anisotropic Elasto-Plastic Model for Geometrically Non-Linear Analysis of Fibre Reinforced Polymer Composites: Formulation and Finite Element Implementation,  Materials, 12(11), 1816
DOI: https://doi.org/10.3390/ma12111816

Anilkumar P. M., A. Haldar, Eelco Jansen, B. N. Rao and R. Rolfes (2019): Design Optimization of Multistable Variable-Stiffness Laminates,  Mechanics of Advanced Materials and Structures, Vol. 26 (1), pp. 48–55, 2019.

B. Hofmeister, M. Bruns, R. Rolfes (2019): Finite element model updating using deterministic optimisation: A global pattern search approach,  Engineering Structures, Volume 195, Pages 373-381
DOI: https://doi.org/10.1016/j.engstruct.2019.05.047

C. G. Gebhardt, B. Hofmeister, C. Hente, R. Rolfes (2019): Nonlinear dynamics of slender structures: a new object-oriented framework,  Computational Mechanics (2019), Volume 63, Issue 2, pp 219–252
DOI: 10.1007/s00466-018-1592-7

C. G. Gebhardt, D. Schillinger, M. C. Steinbach, R. Rolfes (2019): A Framework for Data-Driven Computational Mechanics Based on Nonlinear Optimization
arXiv: 1910.12736

C. G. Gebhardt, I. Romero (2019): The rotating rigid body model based on a non-twisting frame
arXiv: 1911.03666

C. G. Gebhardt, M. C. Steinbach, D. Schillinger, R. Rolfes (2019): A Framework for Data-Driven Computational Dynamics Based on Nonlinear Optimization
arXiv: 1912.11391

C. G. Gebhardt, M. C. Steinbach, R. Rolfes (2019): Understanding the nonlinear dynamics of beam structures: a principal geodesic analysis approach,  Thin-Walled Structures, Volume 140, Pages 357-372
DOI: 10.1016/j.tws.2019.03.009

C. Gerendt, A. Dean, T. Mahrholz, R. Rolfes (2019): On the progressive failure simulation and experimental validation of fiber metal laminate bolted joints,  Composite Structures, Volume 229, 1 December 2019, 111368
DOI: 10.1016/j.compstruct.2019.111368

C. Gerendt, A. Dean, T. Mahrholz, R. Rolfes (2019): On the progressive failure simulation and experimental validation of fiber metal laminate bolted joints,  Composite Structures Volume 229, 1 December 2019, 111368
DOI: https://doi.org/10.1016/j.compstruct.2019.111368

C. Hente, C. G. Gebhardt, D. Pache, R. Rolfes (2019): On the modal analysis of nonlinear beam and shell structures with singular mass and stiffness matrices,  Thin-Walled Structures, Volume 144, 106310
DOI: 10.1016/j.tws.2019.106310

C. Hübler, W. Weijtjens, C. G. Gebhardt, R. Rolfes, C. Devriendt (2019): Validation of Improved Sampling Concepts for Offshore Wind Turbine Fatigue Design,  Energies, Volume 12, Page 603
DOI: 10.3390/en12040603

G. Just, I. Koch, M. Brod, E. Jansen, M. Gude, R. Rolfes (2019): Influence of Reversed Fatigue Loading on Damage Evolution of Cross-Ply Carbon Fibre Composites,  Materials 2019, 12(7), 1153
DOI: https://doi.org/10.3390/ma12071153

I. Koch, G. Just, M. Brod, J. Chen, A. Doblies, A. Dean, M. Gude, R. Rolfes, C. Hopmann, B. Fiedler (2019): Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading,  Materials 2019, 12(11), 1727
DOI: https://doi.org/10.3390/ma12111727

J. Fankhänel, B. Arash, R. Rolfes (2019): Elastic interphase properties of nanoparticle/epoxy nanocomposites: A molecular dynamics study,  Composites Part B: Engineering, Volume 176 (2019)
DOI: 10.1016/j.compositesb.2019.107211

J. Häfele, C. G. Gebhardt, R. Rolfes (2019): A comparison study on jacket substructures for offshore wind turbines based on optimization,  Wind Energ. Sci., 4, 23–40
DOI: 10.5194/wes-4-23-2019

M. Brod, G. Just, A. Dean, E. Jansen, I. Koch, R. Rolfes, M. Gude (2019): Numerical modelling and simulation of fatigue damage in carbon fibre reinforced plastics at different stress ratios,  Thin-Walled Structures, (139), p. 219-231
DOI: https://doi.org/10.1016/j.tws.2019.03.005

R Unger, U. Braun, J. Fankhänel, B. Daum, B. Arash, R. Rolfes (2019): Molecular modelling of epoxy resin crosslinking experimentally validated by near-infrared spectroscopy,  Computational Materials Science 161 (2019) 223–235
DOI: https://doi.org/10.1016/j.commatsci.2019.01.054

R. Unger, W. Exner, B. Arash, R. Rolfes (2019): Non-linear viscoelasticity of epoxy resins: Molecular simulation-based prediction and experimental validation,  Polymer, Volume 180, 10 October 2019, 121722
DOI: 10.1016/j.polymer.2019.121722

van den Broek, S; Minera, S; Jansen, E; Pirrera, A; Weaver, PM; Rolfes, R; (2019): Improving the Static Structural Performance of Panels with Spatially Varying Material Properties Using Correlations,  Advances in Predictive Models and Methodologies for Numerically Efficient Linear and Nonlinear Analysis of Composites, 143-158, Springer, Cham
DOI: 10.1007/978-3-030-11969-0_9

van den Broek, Sander F; Minera, Sergio; Pirrera, Alberto; Weaver, Paul; Jansen, Eelco; Rolfes, Raimund; (2019): Enhanced Deterministic Performance of Panels Using Stochastic Variations of Geometric and Material Parameters,  AIAA Scitech 2019 Forum
DOI: 10.2514/6.2019-0511

A. Dean, R. Rolfes (2018): FE modeling and simulation framework for the forming of hybrid metal-composites clinching joints,  Thin-Walled Structures, Volume 133, December 2018, Pages 134-140
DOI: https://doi.org/10.1016/j.tws.2018.09.034

A. Dean, R. Rolfes, A. Behrens, S. Hübner, A. Chugreev & N. Grbic (2018): Parametric Study of Hybrid Metal-Composites Clinching Joints,  Key Engineering Materials 767, 413-420
DOI: https://doi.org/10.4028/www.scientific.net/KEM.767.413

Alejandro Albanesi, Facundo Bre, Victor Fachinotti, Cristian Gebhardt (2018): Simultaneous ply-order, ply-number and ply-drop optimization of laminate wind turbine blades using the inverse finite element method,  Composite Structures, Band: 184, Seite(n): 894-903
DOI: 10.1016/j.compstruct.2017.10.051

C. Hübler, C. G. Gebhardt, R. Rolfes (2018): Assessment of a standard ULS design procedure for offshore wind turbine sub-structures,  Journal of Physics: Confernece Series, Volume 1104, Pages 012013
DOI: 10.1088/1742-6596/1104/1/012013

C. Hübler, C. G. Gebhardt, R. Rolfes (2018): Methodologies for fatigue assessment of offshore wind turbines considering scattering environmental conditions and the uncertainty due to finite sampling,  Wind Energy, Volume 21, Pages 1092-1105
DOI: 10.1002/we.2216

C. Hübler, W. Weijtjens, R. Rolfes, C. Devriendt (2018): Reliability analysis of fatigue damage extrapolations of wind turbines using offshore strain measurements,  Journal of Physics: Confernece Series, Volume 1037, Pages 032035
DOI: 10.1088/1742-6596/1037/3/032035

Clemens Hübler, Jan Häfele, Cristian Guillermo Gebhardt, Raimund Rolfes (2018): Experimentally supported consideration of operating point dependent soil properties in coupled dynamics of offshore wind turbines,  Marine Structures, Volume 57, Seite(n) 18-37
DOI: 10.1016/j.marstruc.2017.09.002

Cristian Gebhardt, Ariel E. Matusevich, José A. Inaudi (2018): Coupled Transverse and Axial Vibrations Including Warping Effect in Asymmetric Short Beams,  Journal of Engineering Mechanics, Vol. 144, Issue 6
DOI: 10.1061/(ASCE)EM.1943-7889.0001471

Häfele, J., Damiani, R., King, R., Gebhardt, C. G., and Rolfes, R. (2018): A Systematic Approach to Offshore Wind Turbine Jacket Pre-Design and Optimization: Geometry, Cost, and Surrogate Structural Code Check Models,  Wind Energ. Sci., 3, 553-572
DOI: doi.org/10.5194/wes-3-553-2018

Jan Häfele, Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2018): A comprehensive fatigue load set reduction study for offshore wind turbines with jacket substructures,  Renewable Energy, Volume 118, April 2018, Pages 99-112 Weitere Informationen
DOI: 10.1016/j.renene.2017.10.097

K. Schröder, S. Groove, S. Tsiapoki, C. Gebhardt, R. Rolfes (2018): Structural change identication using model updating at a wind turbine blade,  Journal of Physics: Conference Series, ISSN 1742-6588, 1104:012030
DOI: 10.1088/1742-6596/1104/1/012030

Karsten Schröder, Cristian Guillermo Gebhardt, Raimund Rolfes (2018): A two-step approach to damage localization at supporting structures of offshore wind turbines,  Structural Health Monitoring
DOI: 10.1177/1475921717741083

M. Bishara, P. Horst, H. Madhusoodanan, M. Brod, B. Daum and R. Rolfes (2018): A Structural Design Concept for a Multi-Shell Blended Wing Body with Laminar Flow Control,  Energies 2018, 11(2), 383
DOI: https://doi.org/10.3390/en11020383

M. Herr, R. Ewert, B. Faßmann, C. Rautmann, S. Martens, C.-H. Rohardt, A. Suryadi (2018): Low-Noise Technologies for Wind Turbine Blades. Journal of Sound and Vibration,  Journal of Sound and Vibration (427), Seiten 201-202
DOI: 10.1016/j.jsv.2017.10.016

M.Jux, J.Fankhänel, B.Daum, T.Mahrholz, M.Sinapius, R.Rolfes (2018): Mechanical properties of epoxy/boehmite nanocomposites in dependency of mass fraction and surface modification - An experimental and numerical approach,  Polymer, Volume 141 (34-45)
DOI: https://doi.org/10.1016/j.polymer.2018.02.059

Margarita Akterskaia, Eelco Jansen, Stephen R. Hallett, Paul Weaver, Raimund Rolfes (2018): Analysis of skin-stringer debonding in composite panels through a two-way global-local method,  Composite Structures, Volume 202, 15 October 2018, Pages 1280-1294
DOI: https://doi.org/10.1016/j.compstruct.2018.06.064

A. Dean, S. Sahraee, J. Reinoso & R. Rolfes (2017): A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects,  Composites Part B: Engineering 125, 241–258

A. Dean, S. Sahraee, K. Özenc, J. Reinoso, R. Rolfes & M.Kaliske (2017): A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: Development and algorithmic treatment,  International Journal of Fracture 203, 115–134

Alejandro Albanesi, Victor Fachinotti, Ignacio Peralta, Bruno Storti, Cristian Gebhardt (2017): Application of the inverse finite element method to design wind turbine blades,  Journal: Composite Structures, Band 161, Seite(n): 160-172
DOI: 10.1016/j.compstruct.2016.11.039

Arash, B., Thijsse, B. J., Pecenko, A., & Simone, A. (2017): Effect of water content on the thermal degradation of amorphous polyamide 6, 6: A collective variable-driven hyperdynamics study,  Polymer Degradation and Stability, 146, pp260-266

Ayan Haldar, José Reinoso, Eelco Jansen, Raimund Rolfes (2017): Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation.,  Composite Structures
DOI: 10.1016/j.compstruct.2017.02.014

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Hierarchical four-step global sensitivity analysis of offshore wind turbines based on aeroelastic time domain simulations,  Renewable Energy, Band: 111. Seite(n): 878-891
DOI: 10.1016/j.renene.2017.05.013

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Development of a comprehensive database of scattering environmental conditions and simulation constraints for offshore wind turbines,  Wind Energy Science, Band: 2, Seite(n) 491-505
DOI: https://doi.org/10.5194/wes-2-491-2017

Cristian Guillermo Gebhardt, Raimund Rolfes (2017): On the nonlinear dynamics of shell structures: Combining a mixed finite element formulation and a robust integration scheme,  Thin-Walled Structures, Band 118, Seiten 56-72
DOI: 10.1016/j.tws.2017.05.001

M. Bishara, R. Rolfes, O. Allix (2017): Revealing complex aspects of compressive failure of polymer composites – Part I: Fiber kinking at microscale,  Composite Structures, Volume 169, 1 June 2017, Pages 105-115
DOI: https://doi.org/10.1016/j.compstruct.2016.10.092

Margarita Akterskaia, Eelco Jansen, Sina Hühne, Raimund Rolfes (2017): Efficient progressive failure analysis of multi-stringer stiffened composite panels through a two-way loose coupling global-local approach.,  Composite Structures
DOI: 10.1016/j.compstruct.2017.02.011

S.R. Nabavi, F. Haase, E. Jansen & R. Rolfes (2017): Monte-Carlo simulation of the cofiring process in polycrystalline silicon solar cells: Effects of heterogeneity and thickness uncertainties,  Solar Energy Materials and Solar Cells, Vol 170, pp. 263-277

Sebastian Brandt, Matteo Broggi, Jan Häfele, Cristian Guillermo Gebhardt, Raimund Rolfes, Michael Beer (2017): Meta-models for fatigue damage estimation of offshore wind turbines jacket substructures,  Procedia Engineering, Band 199, Seite(n): 1158-1163
DOI: 10.1016/j.proeng.2017.09.292

Stavroula Tsiapoki, Moritz W. Häckell, Tanja Grießmann, Raimund Rolfes (2017): Damage and ice detection on wind turbine rotor blades using a structural health monitoring framework
DOI: 10.1177/1475921717732730

Tobias Bohne, Tim Frerich, Jörg Jendrny, Jan-Patrick Jürgens und Vasily Ploshikhin (2017): Simulation and validation of air flow and heat transfer in an autoclave process for definition of thermal boundary conditions during curing of composite parts,  Journal of Composite Materials

A. Dean, J. Reinoso, S. Sahraee & R. Rolfes (2016): An invariant-based anisotropic material model for short fiber-reinforced thermoplastics: Coupled thermo-plastic formulation,  Composites Part A: Applied Science and Manufacturing 90, 186–199

A. Dean, S. Sahraee, J. Reinoso & R. Rolfes (2016): Finite deformation model for short fibre reinforced composites: Application to hybrid metal-composite clinching joints,  Composite Structures 151, 162–171

A.A. Mousavi, B. Arash, X. Zhuang & T. Rabczuk (2016): A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites,  Composites Part B: Engineering Journal

Alexander Meurer, Benedikt Kriegesmann, Mona Dannert, Raimund Rolfes (2016): Probabilistic perturbation load approach for designing axially compressed cylindrical shells,  Thin-Walled Structures
DOI: 10.1016/j.tws.2016.07.021

Arash, B., Park, H. S., & Rabczuk, T. (2016): Coarse-grained model of the J-integral of carbon nanotube reinforced polymer composites.,  Carbon, 96, pp1084-1092

B. Daum, F. G. Rammerstorfer (2016): The symmetric buckling mode in laminated elastoplas- tic micro-structures under plane strain.,  Acta Mechanica
DOI: 227(10):2843–2859

Benedikt Kriegesmann, Eelco L. Jansen, Raimund Rolfes (2016): Design of cylindrical shells using the Single Perturbation Load Approach – Potentials and application limits,  Thin-Walled Structures, 108
DOI: 10.1016/j.tws.2016.09.005

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2016): Reduced Order Models for Static and Dynamic Analysis of Composite Panels Based on a Perturbation Approach,  Journal: Applied Mechanics and Materials. Band: 828. Seite(n): 199-212

J. Fankhänel, D. Silbernagl, M. Ghasem Zadeh Khorasani, B. Daum, A. Kempe, H. Sturm, R. Rolfes (2016): Mechanical Properties of Boehmite Evaluated by Atomic Force Microscopy Experiments and Molecular Dynamic Finite Element Simulations,  Journal of Nanomaterials 2016, pp 1-13 Weitere Informationen
DOI: 10.1155/2016/5017213

Jan Häfele, Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2016): An improved two-step soil-structure interaction modeling method for dynamical analyses of offshore wind turbines,  Journal: Applied Ocean Research, Band: 55, Seite(n): 141-150
DOI: 10.1016/j.apor.2015.12.001

R. Berger; T. Rogge; E. Jansen; R. Rolfes (2016): Probabilistic vibration and lifetime analysis of regenerated turbomachinery blades,  Journal: Advances in aircraft and spacecraft science, 3. Auflage, S. 503-521 Weitere Informationen
DOI: 10.12989/aas.2016.3.4.503

Sina Hühne, José Reinoso, Eelco Jansen, Raimund Rolfes (2016): A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels,  Journal: Composite Structures. Band: 136. Seite(n): 513-525

Arash, B., Jiang, J. W., & Rabczuk, T. (2015): A review on nanomechanical resonators and their applications in sensors and molecular transportation,  Applied physics reviews, 2(2), 021301.

Heiko Krüger, Raimund Rolfes (2015): A physically based fatigue damage model for fibre-reinforced plastics under plane loading,  Journal: International Journal of Fatigue. Band: 70. Seite(n): 241-251
DOI: 10.1016/j.ijfatigue.2014.09.023

José Reinoso, Marco Paggi, Raimund Rolfes (2015): A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings,  Journal: Computational Materials Science.
DOI: 10.1016/j.commatsci.2015.08.031

Ludwig Krause, Clemens Hübler (2015): Development of a Prescribed Wake Model for Simulation of Wind Turbines,  Journal: Energy Procedia. Band: 80. Seite(n): 342 - 348
DOI: 10.1016/j.egypro.2015.11.438

Lutz Nasdala, Andreas Kempe, Raimund Rolfes (2015): An elastic molecular model for rubber inelasticity,  Journal: Computational Materials Science. Band: 106. Seite(n): 83-99
DOI: 10.1016/j.commatsci.2015.04.036

Moritz B. Fricke, Raimund Rolfes (2015): Towards a complete physically based forecast model for underwater noise related to impact pile driving,  Journal: The Journal of the Acoustical Society of America. Band: 137. Seite(n): 1564
DOI: 10.1121/1.4908241

Arash, B., Wang, Q., & Varadan, V. K. (2014): Mechanical properties of carbon nanotube/polymer composites.,  Scientific reports, 4, 6479

Benedikt Kriegesmann, Milena Möhle, Raimund Rolfes (2014): Sample size dependent probabilistic design of axially compressed cylindrical shells,  Journal: Thin-Walled Structures. Band: 74. Seite(n): 222-231 Weitere Informationen
DOI: 10.1016/j.tws.2013.10.003

Bernd-Arno Behrens, Raimund Rolfes, Milan Vucetic, Ilya Peshekhodov, José Reinoso, Matthias Vogler, Nenad Grbic (2014): Material Characterization for FEA of the Clinching Process of Short Fiber Reinforced Thermoplastics with an Aluminum Sheet,  Journal: Advanced Materials Research. Band: 966-967. Seite(n): 557-568
DOI: 10.4028/www.scientific.net/AMR.966-967.557

Bernd-Arno Behrens, Raimund Rolfes, Milan Vucetic, José Reinoso, Matthias Vogler, Nenad Grbic (2014): Material Modelling of Short Fiber Reinforced Thermoplastic for the FEA of a Clinching Test,  Journal: Procedia CIRP. Band: 18. Reihe: 18. Seite(n): 250-255
DOI: 10.1016/j.procir.2014.06.140

C. G. Gebhardt, B. A. Roccia (2014): Non-linear aeroelasticity: An approach to compute the response of three-blade large-scale horizontal-axis wind turbines,  Journal: Renewable Energy, Band: 66, Seite(n): 495-514
DOI: 10.1016/j.renene.2013.12.040

Eelco L. Jansen, Raimund Rolfes (2014): Non-linear free vibration analysis of laminated cylindrical shells under static axial loading including accurate satisfaction of boundary conditions,  Journal: International Journal of Non-Linear Mechanics. Band: 66. Reihe: 66. Seite(n): 66-74
DOI: 10.1016/j.ijnonlinmec.2014.03.004

Jan Häfele, Ferit Küçükay (2014): Multi-body dynamics analysis of power train judder oscillations considering aggregate dynamics,  Journal: International Journal of Vehicle Noise and Vibration. Band: 10. Seite(n): 64
DOI: 10.1504/IJVNV.2014.059630

Matthias Holl, Timo Rogge, Stefan Loehnert, Peter Wriggers, Raimund Rolfes (2014): 3D multiscale crack propagation using the XFEM applied to a gas turbine blade,  Journal: Computational Mechanics. Band: 53. Seite(n): 173-188
DOI: 10.1007/s00466-013-0900-5

Sebastian Kelma, Kirill Alexander Schmoor, Jan Goretzka, Michael Hansen (2014): Sicherheitsaspekte der Tragstruktur von Offshore-Windenergieanlagen,  Journal: Bautechnik. Band: 91. Seite(n): 543-553 Weitere Informationen

Stephan Zerbst, Stavroula Tsiapoki, Raimund Rolfes (2014): Novel approach for early damage detection on rotor blades of wind energy converters,  Journal: Smart Structures and Systems. Band: 14. Seite(n): 419-444
DOI: 10.12989/sss.2014.14.3.419

B. Daum, G. Dehm, H. Clemens, M. Rester, F.D. Fischer, and F.G. Rammerstorfer (2013): Elastoplastic buckling as source of misinterpretation of micropillar tests.,  Acta materialia
DOI: 61(13):4996– 5007

B.A. Roccia, S. Preidikman, C.G. Gebhardt, J.C. Massa (2013): Dynamics of Micro-Air-Vehicles with Flapping Wings: A Multibody System Approach,  Journal: Latin America Transactions, IEEE (Revista IEEE America Latina), Band: 11, Seite(n): 183-189
DOI: 10.1109/TLA.2013.6502800

Matthias Vogler, Raimund Rolfes, Pedro P. Camanho (2013): Modeling the inelastic deformation and fracture of polymer composites – Part I: Plasticity model,  Journal: Mechanics of Materials. Band: 59. Seite(n): 50-64
DOI: 10.1016/j.mechmat.2012.12.002

Moritz B. Fricke, Raimund Rolfes (2013): Investigation of sonar transponders for offshore wind farms: Modeling approach, experimental setup, and results,  Journal: The Journal of the Acoustical Society of America. Band: 134. Seite(n): 3536-3545
DOI: 10.1121/1.4823841

Moritz W. Häckell, Raimund Rolfes (2013): Monitoring a 5MW offshore wind energy converter—Condition parameters and triangulation based extraction of modal parameters,  Journal: Mechanical Systems and Signal Processing. Band: 40. Seite(n): 322-343 Weitere Informationen
DOI: 10.1016/j.ymssp.2013.04.004

Pedro P. Camanho, Miguel A. Bessa, Giuseppe Catalanotti, Matthias Vogler, Raimund Rolfes (2013): Modeling the inelastic deformation and fracture of polymer composites – Part II: Smeared crack model,  Journal: Mechanics of Materials. Band: 59. Seite(n): 36-49
DOI: 10.1016/j.mechmat.2012.12.001

Arash, B., & Wang, Q. (2012): A review on the application of nonlocal elastic models in modeling of carbon nanotubes and graphenes.,  Computational Materials Science, 51(1), pp303-313

Benedikt Kriegesmann, Eelco L. Jansen, Raimund Rolfes (2012): Semi-analytic probabilistic analysis of axially compressed stiffened composite panels,  Journal: Composite Structures. Band: 94. Seite(n): 654-663
DOI: 10.1016/j.compstruct.2011.08.033

Benedikt Kriegesmann, Raimund Rolfes, Eelco L. Jansen, Isaac Elishakoff, Christian Hühne, Alexander Kling (2012): Design Optimization of Composite Cylindrical Shells under Uncertainty,  Journal: Computers, Materials, & Continua. Band: 32. Seite(n): 177-200 Weitere Informationen
DOI: 10.3970/cmc.2012.032.177

C. G. Gebhardt, S. Preidikman, M. H. Jørgensen, J. C. Massa (2012): Non-linear aeroelastic behavior of large horizontal-axis wind turbines: A multibody system approach,  Journal: International Journal of Hydrogen Energy, Band: 37, Seite(n): 14719-14724
DOI: 10.1016/j.ijhydene.2011.12.090

David Chrupalla, Janko Kreikemeier, Sina Berg, Luise Kärger, Mathias Doreille, Thomas Ludwig, Eelco L. Jansen, Raimund Rolfes, Alexander Kling (2012): A Loose Coupling Multiscale Approach for the Detailed Analysis of the Influence of Critical Areas on the Global Behaviour of Composite Structures,  Journal: Computers, Materials, & Continua. Band: 32. Seite(n): 159-176
DOI: 10.3970/cmc.2012.032.159

Isaac Elishakoff, Benedikt Kriegesmann, Raimund Rolfes, Christian Hühne, Alexander Kling (2012): Optimization and Anti-Optimization of Buckling Load for Composite Cylindrical Shells under Uncertainties,  Journal: AIAA Journal. Band: 50. Seite(n): 1513-1524

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2012): Underwater sound mitigation of bubble curtains with different bubble size distributions,  Journal: Proceedings of Meetings on Acoustics. Band: 17. Seite(n): 070055 Weitere Informationen
DOI: 10.1121/1.4772936

Lutz Nasdala, Andreas Kempe, Raimund Rolfes (2012): Are finite elements appropriate for use in molecular dynamic simulations?,  Journal: Composites Science and Technology. Band: 72. Seite(n): 989-1000
DOI: 10.1016/j.compscitech.2012.03.008

Peter Schaumann, Malte Gottschalk, Raimund Rolfes, Moritz Häckell (2012): Forschung an Tragstrukturen im Offshore-Windenergie- Testfeld alpha ventus,  Journal: Stahlbau. Band: 81. Seite(n): 728–730
DOI: 10.1002/stab.201201605

Benedikt Kriegesmann, Raimund Rolfes, Christian Hühne, Alexander Kling (2011): Fast Probabilistic Design Procedure for Axially Compressed Composite Cylinders,  Journal: Composites Structures. Band: 93. Seite(n): 3140-3149
DOI: 10.1016/j.compstruct.2011.06.017

Heiko Krüger, Raimund Rolfes (2011): Energiebasiertes Degradationsmodell zur schichtenweisen Beschreibung der Ermüdung von Faserkunststoffverbunden unter Berücksichtigung verschiedener Versagensmodi,  Journal: NAFEMS-Magazin (Fachbeitrag, Betriebsfestigkeit). Band: 19. Seite(n): 49-57

Paolo Tiso, Eelco L. Jansen, Mostafa Abdalla (2011): Reduction Method for Finite Element Nonlinear Dynamic Analysis of Shells,  Journal: AIAA Journal. Band: 49. Seite(n): 2295-2304
DOI: 10.2514/1.J051003

Raimund Rolfes, Matthias Vogler, Steffen Czichon, Gerald Ernst (2011): Exploiting the structural reserve of textile composite structures by progressive failure analysis using a new orthotropic failure criterion,  Journal: Computers & Structures. Band: 89. Seite(n): 1214-1223 Weitere Informationen

Steffen Czichon, Kristian Zimmermann, Peter Middendorf, Matthias Vogler, Raimund Rolfes (2011): Three-Dimensional Stress and Progressive Failure Analysis of Ultra Thick Laminates and Experimental Validation,  Journal: Composite Structures. Band: 93. Seite(n): 1394-1403
DOI: 10.1016/j.compstruct.2010.11.009

Stephan Zerbst, Martin Knops, Karl-Heinz Haase, Raimund Rolfes (2011): Rotorblätter aus Composites - Wie ein Sensor Schäden früh und sicher erkennt,  Journal: Fachzeitschrift „Composites World'.

Tanvir Rahman, Eelco L. Jansen, Paolo Tiso (2011): A finite element-based perturbation method for nonlinear free vibration analysis of composite cylindrical shells,  Journal: International Journal of Structural Stability and Dynamics. Band: 11. Seite(n): 717-734
DOI: 10.1142/S0219455411004312

Tanvir Rahman, Eelco L. Jansen, Zafer Gürdal (2011): Dynamic buckling analysis of composite cylindrical shells using a finite element based perturbation method,  Journal: Nonlinear Dynamics. Band: 66. Seite(n): 389-401
DOI: 10.1007/s11071-011-0056-9

Tanvir Rahman, Samuel T. Ijsselmuiden, Mostafa M. Abdalla, Eelco L. Jansen (2011): Postbuckling analysis of variable stiffness composite plates using a finite element-based perturbation method,  Journal: International Journal of Structural Stability and Dynamics. Band: 11. Seite(n): 735-753
DOI: 10.1142/S0219455411004324

Benedikt Kriegesmann, Raimund Rolfes, Christian Hühne, Jan Teßmer, Johann Arbocz (2010): Probabilistic Design of Axially Compressed Composite Cylinders with Geometric and Loading Imperfections,  Journal: International Journal of Structural Stability and Dynamics. Band: 10. Seite(n): 623-644
DOI: 10.1142/S0219455410003658

C. G. Gebhardt, S. Preidikman, J. C. Massa (2010): Numerical simulations of the aerodynamic behavior of large horizontal-axis wind turbines,  Journal: International Journal of Hydrogen Energy, Band: 35, Reihe: 35, Seite(n): 6005-6011
DOI: 10.1016/j.ijhydene.2009.12.089

Christian Hühne, Anne-Kathrin Zerbst, Guido Kuhlmann, Christian Steenbock, Rolfes Rolfes (2010): Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models,  Journal: Composite Structures. Band: 92. Seite(n): 189-200
DOI: 10.1016/j.compstruct.2009.05.011

Gerald Ernst, Matthias Vogler, Christian Hühne, Raimund Rolfes (2010): Multiscale Progressive Failure Analysis of Textile Composites,  Journal: Composites Science and Technology. Band: 70. Seite(n): 61-72
DOI: 10.1016/j.compscitech.2009.09.006

Lutz Nasdala, Andreas Kempe, Raimund Rolfes (2010): The Molecular Dynamic Finite Element Method (MDFEM),  Journal: CMC: Computers, Materials & Continua. Band: 19. Seite(n): 57-104
DOI: 10.3970/cmc.2010.019.057

Matthias Vogler, Gerald Ernst, Raimund Rolfes (2010): Invariant Based Transversely-Isotropic Material and Failure Model for Fiber-Reinforced Polymers,  Journal: Computers, Materials and Continua. Band: 16. Seite(n): 25-49

R. Andrew Swartz, Jerome P. Lynch, Stephan Zerbst, Bert Sweetman, Raimund Rolfes (2010): Structural monitoring of wind turbines using wireless sensor networks,  Journal: Smart Structures and Systems. Herausgeber: 1738-1584. Institut: 3, SI. Band: 6. Seite(n): 183-196
ISBN: English

Stephan Zerbst, Martin Knops, Karl-Heinz Haase, Raimund Rolfes (2010): Schadensfrüherkennung an Rotorblättern von Windkraftanlagen,  Journal: Lightweight Design - Fachzeitschrift für den Leichtbau bewegter Massen.

C. G. Gebhardt, S. Preidikman, J. C. Massa (2009): Características generales de la aerodinamica de generadores eólicos de eje horizontal y gran potencia,  Journal: Avances en Energías Renovables y Medio Ambiente. Band: 13. Seite(n): 165-172 Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2009): Luftblasen schützen Wale und Robben,  Journal: Erneuerbare Energien. Band: 19. Weitere Informationen

Christian Hühne, Raimund Rolfes, Elmar Breitbach, Jan Teßmer (2008): Robust Design of Composite Cylindrical Shells Under Axial Compression – Simulation and Validation,  Journal: Thin-Walled Structures. Band: 46. Seite(n): 947-962
DOI: 10.1016/j.tws.2008.01.043

Eilering, S., Hente C. (2008): Zur Stabilisierung von parallelgurtigen Vollwandträgern im Holzbau,  Bauingenieur – Ausgabe 6-2008, S.288-296

Gerald Ernst, Matthias Vogler, Christian Hühne, Raimund Rolfes (2008): Virtuelle Versuche zur Bestimmung von Steifigkeiten und Festigkeiten textiler Faserkunststoffverbunde,  Journal: NAFEMS Magazin. Band: 9. Seite(n): 53-58

Stefanie Steppeler, Gerrit Haake, Raimund Rolfes, Peter Schaumann (2008): Forschung im ersten deutschen Offshore-Windpark – Verbundprojekt GIGAWIND alpha ventus der Leibniz Universität Hannover und der Fraunhofer-Gesellschaft,  Journal: Stahlbau. Band: 77. Seite(n): 681-684
DOI: 10.1002/stab.200810081

Christian Hühne, Anne-Kathrin Ungrad, Christian Steenbock, Raimund Rolfes, Guido Kuhlmann (2007): Virtueller Versuchsstand für CFK-Nietverbindungen mit Shim-Schicht,  Journal: NAFEMS Magazin. Band: 8. Seite(n): 34-43 Weitere Informationen

K.-H. Elmer, W.-J. Gerasch, T. Neumann, J. Gabriel, K. Betke, M. Schultz v. Glahn (2007): Measurement and Reduction of Offshore Wind Turbine Construction Noise,  Journal: DEWI Magazin. Band: 30. Seite(n): 33-38

R. Nabavi, M. H. Yas & M. Shakeri (2007): Natural frequency optimization of laminated cylindrical shell subjected to Tsai-Hill failure constraint using penalty method,  International Journal of Key Engineering Materials, Vol. 334-335 , pp 9-1

Robert Zem?ík, Raimund Rolfes, Michael Rose, Jan Teßmer (2007): High-performance four-node shell element with piezoelectric coupling for the analysis of smart laminated structures,  Journal: International Journal for Numerical Methods in Engineering. Band: 70. Seite(n): 934-961
DOI: 10.1002/nme.1909

Degenhardt, Richard; Rolfes, Raimund; Zimmermann, Rolf; Rohwer, Klaus (2006): COCOMAT — Improved Material Exploitation of Composite Airframe Structures by Accurate Simulation of Postbuckling and Collapse,  Composite Structures, Band: 73, Seiten 175-178
DOI: 10.1016/j.compstruct.2005.11.042

Gerald Ernst, Christian Hühne, Raimund Rolfes (2006): Micromechanical voxel unit cell for strength analysis of fiber reinforced plastics,  Journal: Proceedings of the CDCM06. Seite(n): 1-9 Weitere Informationen

Gerald Ernst, Christian Hühne, Raimund Rolfes (2006): Micromechanical strength analysis of fiber reinforced plastics,  Journal: Proceedings in Applied Mathematics and Mechanics. Band: 6. Seite(n): 157-158

Luise Kärger, Anja Wetzel, Raimund Rolfes, Klaus Rohwer (2006): A three-layered sandwich element with improved transverse shear stiffness and stresses based on FSDT,  Journal: 'Computers & Structures'. Band: 84. Seite(n): 843-854
DOI: 10.1016/j.compstruc.2006.02.007

M. Feldmann, W.-J. Gerasch, G. Wolperding (2006): Einsatz schlanker Außenstützen für die neue Philharmonie in Luxemburg durch Reduktion der Schwingungsamplituden,  Journal: Bauingenieur. Band: 81. Seite(n): 465-474

N. Cottin, J. Reetz (2006): Accuracy of multiparameter eigenvalues used for dynamic model updating with measured natural frequencies only,  Journal: Mechanical Systems and Signal Processing. Band: 20. Seite(n): 65-77
DOI: 10.1016/j.ymssp.2004.10.005

Philipp Buermann, Raimund Rolfes, Jan Tessmer, Martin Schagerl (2006): A semi-analytical model for local post-buckling analysis of stringer- and frame-stiffened cylindrical panels,  Journal: Thin-Walled Structures. Band: 44. Seite(n): 102-114
DOI: 10.1016/j.tws.2005.08.010

Robert Zem?ík, Raimund Rolfes, Michael Rose, Jan Tessmer (2006): High-Performance 4-Node Shell Element with Piezoelectric Coupling,  Journal: Mechanics of Advanced Materials and Structures. Band: 13. Seite(n): 393-401
DOI: 10.1080/15376490600777657

Rolf Zimmermann, Raimund Rolfes (2006): POSICOSS — Improved Postbuckling Simulation for Design of Fibre Composite Stiffened Fuselage Structures,  Journal: Composite Structures. Band: 73. Seite(n): 171-174
DOI: 10.1016/j.compstruct.2005.11.041

Anja Wetzel, Luise Kärger, Raimund Rolfes, Klaus Rohwer (2005): Evaluation of two finite element formulations for a rapid 3D stress analysis of sandwich structures,  Journal: 'Computers & Structures'. Band: 83. Seite(n): 1537-1545
DOI: 10.1016/j.compstruc.2005.02.005

Gerald Ernst, Lutz Nasdala, Heinrich Rothert (2005): Simulation von Kohlenstoffnanoröhren mit Stone-Wales Defekten,  Journal: Proceedings in Applied Mathematics and Mechanics. Band: 5. Seite(n): 295-296

Lutz Nasdala, Birger Hohn, Kai-Uwe Schröder (2005): FE-Untersuchungen zur Interaktion von Biegedrillknicken und plastischem Querschnittsversagen bei Durchlaufträgern,  Journal: Stahlbau. Band: 74. Seite(n): 319-330
DOI: 10.1002/stab.200590061

Lutz Nasdala, Birger Hohn, Reinhard Rühl (2005): Bemessung von Stirnplattenanschlussen mit elastomerer Zwischenschicht,  Journal: Bauingenieur. Seite(n): 553-561

Lutz Nasdala, Gerald Ernst (2005): Development of a 4-node finite element for the computation of nano-structured materials,  Journal: Computational Materials Science. Band: 33. Seite(n): 443-458

Lutz Nasdala, Gerald Ernst, Heinrich Rothert (2005): Simulation von inelastischem Materialverhalten mit Hilfe eines kraftfeldbasierten FE-Verfahrens,  Journal: Proceedings in Applied Mathematics and Mechanics. Band: 5. Seite(n): 351-352

Lutz Nasdala, Gerald Ernst, Mathias Lengnick, Heinrich Rothert (2005): Finite Element Analysis of Carbon Nanotubes with Stone-Wales Defects,  Journal: 'Computer Modeling in Engineering & Sciences'. Band: 7. Seite(n): 293-304

T. Neumann, J. Gabriel, K.-H. Elmer, K. Betke (2005): Schallimmissionen durch Offshore-Windparks,  Journal: Erneuerbare Energien. Band: 15. Seite(n): 39-43

T. Neumann, J. Gabriel, K.-H. Elmer, K. Betke (2005): Beeinflussung der Meeresumwelt durch Offschore-Schall – Schallausbreitung und Minderungsmaßnahmen. Influences on Marine Environment by Noise Emissions from Offshore Wind Farms – Sound Propagation and Measures for Noise Reduction,  Journal: DEWI Magazin. Band: 27. Seite(n): 13-22

T. Neumann, J. Gabriel, W.-J. Gerasch, K.-H. Elmer, M. Schultz v. Glahn, K. Betke (2005): Standards for the Assessment of Acoustic Emissions of Offshore Wind Farms,  Journal: DEWI Magazin. Band: 26. Seite(n): 49-53

G. Kuhlmann, R. Rolfes (2004): A Hierarchic 3D Finite Element for Laminated Composites,  Journal: International Journal for Numerical Methods in Engineering. Band: 61. Seite(n): 96-116

R. Rolfes (2004): Advanced Structural Analysis Methods for High Performance Composite Structures,  Journal: ACSS Bulletin, Australian Composite Structures Society. Band: 12.

J. Noack, R. Rolfes, J. Tessmer (2003): New Layerwise Theories and Finite Elements for Efficient Thermal Analysis of Hybrid Structures,  Journal: Computers and Structures. Band: 81. Seite(n): 2525-2538

R. Rolfes, J. Tessmer, K. Rohwer (2003): Models and Tools for Heat Transfer, Thermal Stresses and Stability of Composite Aerospace Structures,  Journal: Journal of Thermal Stresses. Band: 26. Seite(n): 641-670

R. Rolfes, J. Tessmer (2002): 3D Thermal Analysis of Hybrid Composite Structures,  Journal: PAMM, Proc. Appl. Math. Mech. Band: 1. Seite(n): 215-216

D. Petersen, R. Zimmermann, R. Rolfes (2001): Thermo-Mechanical Design Aspects for Primary Composite Structures of Large Transport Aircraft,  Journal: Aerospace Science and Technology. Band: 5. Seite(n): 135-146

J. Juhasz, R. Rolfes, K. Rohwer (2001): A New Strength Model for Application of a Physically Based Failure Criterion to Orthogonal 3D Fiber Reinforced Plastics,  Journal: Composites Science and Technology. Band: 61. Seite(n): 1821-1832

K. Rohwer, R. Rolfes, H. Sparr (2001): Higher-Order Theories for Thermal Stresses in Layered Plates,  Journal: Int. Journal Solids and Structures. Band: 38. Seite(n): 3673-3687

R. Zimmermann, R. Rolfes (2001): CFRP Fuselage Structures – Postbuckling Permitted,  Journal: 'Air & Space Europe'. Band: 3. Seite(n): 129-131

R. Rolfes, K. Rohwer (2000): Integrated Thermal and Mechanical Analysis of Composite Plates and Shells,  Journal: Composites Science and Technology. Band: 60. Seite(n): 2097-2106
DOI: 10.1016/S0266-3538(00)00117-2

R. Rolfes, J. Noack, M. Taeschner (1999): High Performance 3D-Analysis of Thermo-Mechanically Loaded Composite Structures,  Journal: Composite Structures. Band: 46. Seite(n): 367-379

K. Rohwer, R. Rolfes (1998): Calculating 3D Stresses in Layered Composite Plates and Shells,  Journal: Mechanics of Composite Materials. Band: 34. Seite(n): 491-500

R. Rolfes, A.K. Noor, H. Sparr (1998): Evaluation of Transverse Thermal Stresses in Composite Plates Based on First-Order Shear Deformation Theory,  Journal: Computer Methods in Applied Mechanics and Engineering. Band: 167. Seite(n): 355-368

R. Rolfes, K. Rohwer (1998): Eine einfache Methode zur Ermittlung aller Querspannungen in Faserverbundplatten als Voraussetzung einer verbesserten Versagensanalyse,  Journal: Technische Mechanik. Band: 18. Seite(n): 161-167

R. Rolfes, K. Rohwer, M. Ballerstaedt (1998): Efficient Linear Transverse Normal Stress Analysis of Layered Composite Plates,  Journal: Computers and Structures. Band: 68. Seite(n): 643-652

R. Rolfes, K. Rohwer (1997): Improved Transverse Shear Stresses in Composite Finite Elements Based on First Order Shear Deformation Theory,  Journal: Int. J. Num. Meth. Eng.. Band: 40. Seite(n): 51-60

R. Rolfes, U. Hammerschmidt (1995): Transverse Thermal Conductivity of CFRP-Laminates: A Numerical and Experimental Validation of Approximation Formulae,  Journal: Composites Science and Technology. Band: 54. Seite(n): 45-54

R. Rolfes (1991): Zur Balance der gemischten Ansätze für Scheibenelemente,  Journal: ZAMM. Band: 71. Seite(n): T662-T665

E. Stein, R. Rolfes (1990): Mechanical Conditions for Stability and Optimal Convergence of Mixed Finite Elements for Linear Plane Elasticity,  Journal: Computer Methods in Applied Mechanics and Engineering. Band: 84. Seite(n): 77-95

D. Bischoff, R. Rolfes (1987): Iterative Lösungsverfahren für gemischte Probleme,  Journal: ZAMM. Band: 67. Seite(n): T349-T351

Franziska Müller, Paula Krabbe, Clemens Hübler, Raimund Rolfes (2021): Assessment of meta-models to estimate fatigue loads of an offshore wind turbine,  Proceedings of the Thirty-first International Ocean and Polar Engineering Conference, Rhodes, pp 543-550.

B. Hofmeister, C. Jonscher, C. Hübler, R. Rolfes (2020): Damage localisation by residual energy from multiple-input finite impulse response prognosis,  10th European Workshop on Structural Health Monitoring, Palermo, Italien

B. Hofmeister, T. Grießmann, C. Hübler, R. Rolfes (2020): Schwingungsprognose im modernen urbanen Brettsperrholzbau: Herausforderungen und messdatenbasierte Lösungsansätze,  Baustatik – Baupraxis 14, Stuttgart

C. Hübler (2020): Stochastic sensitivity analysis: determination of the best approximation of Sobol’ sensitivity indices,  Proceedings of the 29th International Conference on Noise and Vibration Engineering, Löwen, Belgien

Jasmin Hörmeyer, Tobias Bohne, Raimund Rolfes (2020): Prediction of long-range propagation of wind turbine noise using the CNPE method,  Fortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik, Hannover, Deutschland

Marlene Bruns, Benedikt Hofmeister, Clemens Hübler, Raimund Rolfes (2020): Model validation using iterative finite element model updating,  Proceedings of the 29th International Conference on Noise and Vibration Engineering, Löwen, Belgien

Mirco Jonkeren, Jasmin Hörmeyer, Tobias Bohne, Raimund Rolfes (2020): Modellierung der Schallabstrahlung des Turmes einer Windenergieanlage,  Fortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik, Hannover, Deutschland

Nils Poschadel, Christian Gill, Stephan Preihs, Susanne Martens, Jakob Bergner, Raimund Rolfes, Jürgen Peissig (2020): Machine Learning basierte Klassifikation von Außenschallszenen für Lärmmessungen an Windenergieanlagen,  Fortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik, Hannover, Deutschland

Susanne Martens, Tobias Bohne, Raimund Rolfes (2020): Entfernungsabhängige Refraktionseffekte in der Schallausbreitung von Windenergieanlagen,  Fortschritte der Akustik - DAGA 2020, 46. Jahrestagung für Akustik, Hannover, Deutschland

Susanne Martens, Tobias Bohne, Raimund Rolfes (2020): An evaluation method for extensive wind turbine sound measurement data and its application,  Proceedings of Meetings on Acoustics, Acoustical Society of America, Vol 41.
DOI: https://doi.org/10.1121/2.0001326

A. Mousavi, B. Arash, R. Rolfes (2019): Mechanical properties of DGEBA epoxy resin: Insights from coarse-grained simulations,  7th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2019), Girona, Spain

B. Hofmeister, M. Bruns, T. Grießmann and R. Rolfes (2019): An Inverse Model Reduction Method for Finite Element Model Updating in Structural Health Monitoring,  Wind Energy Science Conference 2019, Cork, Irland

C. Hübler, C. G. Gebhardt, R. Rolfes (2019): Assessment of Sensitivity Analysis Methods of Different Complexity for Offshore Wind Turbines,  29th European Safety and Reliability Conference (ESREL), Hannover, Germany

D. Anastasio, J. Dietrich, J. Noël, G. Kerschen, S. Marchesiello, J. Häfele, C. Gebhardt, R. Rolfes (2019): Dynamics of Geometrically-nonlinear Beam Structures, Part 1: Numerical Modeling,  37th Conference and Exposition on Structural Dynamics (IMAC-XXXVII), Orlando, FL, USA

D. Anastasio, J. Dietrich, J. Noël, G. Kerschen, S. Marchesiello, J. Häfele, C. Gebhardt, R. Rolfes (2019): Dynamics of Geometrically-nonlinear Beam Structures, Part 2: Experimental Analysis,  37th Conference and Exposition on Structural Dynamics (IMAC-XXXVII), Orlando, FL, USA

J. Hörmeyer, C. Hübler, T. Bohne, R. Rolfes (2019): Prediction of atmospheric sound propagation subject to parameter variability of atmospheric turbulence,  23rd International Congress on Acoustics (ICA), Aachen, Germany

J. Hörmeyer, T. Bohne, R. Rolfes (2019): Beurteilung der Auswirkung der atmospharischen Turbulenz auf die Schallausbreitung auf Grundlage einer Parameterstudie,  DAGA 2019 - 45. Jahrestagung für Akustik, Rostock, Deutschland

M. Brod, A. Dean, R. Rolfes (2019): An energy-based model for the fatigue analysis of fiber reinforced composite structures under load reversals,  Review of Aeronautical Fatigue Investigations in Germany during the Period April 2017 to March 2019, 36th Conference & 30th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity (ICAF), Krakow, Poland

M. Brod, A. Dean, S. Scheffler, G. Just, I. Koch, R. Rolfes, M. Gude (2019): Experimental Investigation and Numerical Simulation of Fatigue Damage in CFRP Composites under Complex Stress States,  7th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2019), Girona, Spain

M. Bruns, B. Hofmeister, C. Hübler, R. Rolfes (2019): Damage Localization Via Model Updating Using a Damage Distribution Function,  Proceedings of the 12th International Workshop on Structural Health Monitoring, pp 909-917
DOI: 10.12783/shm2019/32202

M. Bruns, B. Hofmeister, T. Grießmann, R. Rolfes (2019): Comparative study of parameterizations for damage localization with finite element model updating,  Proceedings of the 29th European Safety and Reliability Conference, pp 1125-1132
DOI: 10.3850/978-981-11-2724-3 0713-cd

S. Martens, T. Bohne, R. Rolfes (2019): Towards the use of secondary windscreens to improve wind turbine sound measurements,  Proceedings of 15th EAWE PhD Seminar on Wind Energy, Nantes, Frankreich

S. Martens, T. Bohne, R. Rolfes (2019): Analyzing the Sound Propagation of Wind Turbines Based on Measured Acoustical and Meteorological Parameters,  DAGA 2019 - 45. Jahrestagung für Akustik, Rostock, Deutschland

S. Martens, T. Bohne, R. Rolfes (2019): Measuring and Analysing the Sound Propagation of Wind Turbines,  Proceedings of the International Conference on Wind Turbine Noise 2019, Lissabon, Portugal

S. Wernitz, D. Pache, T. Grießmann, R. Rolfes (2019): Damage Localization with SP2E Under Changing Conditions,  International Workshop of Structural Health Monitoring 2019

A. Dean, R. Rolfes (2018): Co-rotational Formulation and Implementation of an Invariant-based Model for Geometrically Nonlinear Analyses of Composites,  Proceedings of the 2nd Conference on Civil Engineering (CCE2018), Pages 41-47, Khartoum (Sudan)

Andreas Ehrmann, Cristian Guillermo Gebhardt, Raimund Rolfes (2018): Determination of Representative Offshore Wind Turbine Locations for Fatigue Load Monitoring by Means of Hierarchical Clustering,  Extended Abstract in Proceedings of International Modal Analysis Conference (IMAC XXXVI), Orlando

Anilkumar P. M., A. Haldar, E. L. Jansen, B. N. Rao and R. Rolfes (2018): Effect of actuation procedure in MFC actuators for morphing of bistable laminates,  Proceedings of Structural Engineering Convention, Jadavpur University, Kolkata, India

Benedikt Hofmeister, Cristian Guillermo Gebhardt, Christian Hente, Raimund Rolfes (2018): Sparsity pattern extraction for assembly of KKT-like matrices in multibody dynamics,  Proceedings in Applied Mathematics and Mechanics, 89th GAMM Annual Meeting (2018)

C. Gerendt, N. Englisch, E. Jansen, R. Rolfes (2018): Energy based fatigue damage analysis of CFRP-GFRP hybrid laminates,  ICFC 7 - the 7th International Conference on Fatigue of Composites, Vicenza, Italy (2018)

C. Hente, C. G. Gebhardt, B. Hofmeister, R. Rolfes (2018): On the modal analysis of flexible multibody systems with singular mass and stiffness matrices,  Proceedings in Applied Mathematics and Mechanics, 89th GAMM Annual Meeting (2018)

J. Hörmeyer, R. Rolfes (2018): Numerical Model for Prediction of Sound Propagation Emitted from Wind Turbines.,  Euronoise 2018, the 11th European Congress and Exposition on Noise Control Engineering, Hersonissos, Crete, Greece

J. Hörmeyer, T. Bohne, R. Rolfes (2018): Ein numerisches Modell zu Vorhersage der Schallausbreitung von Windenergieanlagen unter Berücksichtigung atmosphärischer Einflüsse.,  DAGA 2018 - 44. Jahrestagung für Akustik, München, Deutschland

J. Riemenschneider, M. Pohl, R. Ungurán, V. Petrović, M. Kühn, A. Haldar,H. Madhusoodanan, E. Jansen, R. Rolfes (2018): Smart Trailing Edges for Wind Turbines,  ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation, San Antonio, Texas (USA), September 10–12
DOI: 10.1115/SMASIS2018-7916
ISBN: 978-0-7918-5194-4

M. Brod, G. Just, E. Jansen, I. Koch, R. Rolfes, M. Gude (2018): Simulation of the fatigue damage behavior of carbon composites under consideration of manufacturing induced residual stresses,  7th International Conference on Fatigue of Composites (ICFC 7), Vicenza, Italy

Marlene Bruns, Benedikt Hofmeister, Dorian Pache, Raimund Rolfes (2018): Finite Element Model Updating of a Wind Turbine Blade - A Comparative Study,  EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, pp 569-580

N. Safdar, B. Daum, R. Rolfes (2018): Stochastic Compressive Failure Surface Modelling for the Unidirectional Fibre Reinforced Composites under Plainstress.,  6th European Conference on Computational Mechanics (ECCM 6 -ECFD 7 2018), Glasgow, UK

S. Martens, T. Bohne, R. Rolfes (2018): Einfluss der Meteorologie und des Bodens auf die Schallausbreitung bodennaher.,  DAGA 2018 - 44. Jahrestagung für Akustik, München, Deutschland

S. Wernitz, D. Pache, T. Grießmann, R. Rolfes (2018): Performance of an H∞ estimation based damage localization approach in the context of automated Structural Health Monitoring,  9th European Workshop on Structural Health Monitoring

van den Broek, Sander; Minera, Sergio; Jansen, Eelco; Weaver, Paul M; Rolfes, Raimund; (2018): Effect of spatially varying material properties on the post-buckling behaviour of composite panels utilising geodesic stochastic fields,  Proceedings of the 6th Aircraft Structural Design conference, Bristol

A. Dean, R. Rolfes, A. Behrens, A. Bouguecha, S. Hübner, C. Bonk & N. Grbic (2017): Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature,  AIP Conference Proceedings 1896, Paper No. 030037

Alexandre Suryadi, Susanne Martens, Michaela Herr (2017): Trailing-Edge Noise Reduction Technologies for Applications in Wind Energy,  23rd AIAA/CEAS Aeroacoustics Conference, Denver, Colorade, USA

B. Daum, A. Dean, R. Rolfes (2017): A systematic approach to invariant-based anisotropic non-associative plasticity for fiber reinforced composites,  21th International Conference on Composites Materials (ICCM21), Xi'an, China

C. Gerendt, E. Jansen, R. Rolfes (2017): A FATIGUE DAMAGE MODEL FOR FIBER METAL LAMINATES INCLUDING FIBER/MATRIX DEGRADATION,  6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017), Eindhoven, Netherlands

Clemens Hübler, Franziska Müller, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Global Sensitivity Analysis of Offshore Wind Turbine Substructures,  Proceedings of the 15th International Probabilistic Workshop, pp 341-352, Dresden

Cristian Gebhardt, Raimund Rolfes (2017): Gesamtdynamik von Windenergieanlagen mit besonderer Berücksichtigung der Wind-Struktur-Interaktion,  Baustatik-Baupraxis 13, Bochum

H. Madhusoodanan, E. L. Jansen, R. Rolfes (2017): SIMULATION OF DAMAGE BEHAVIOR IN GFRPS IN THE VERY HIGH CYCLE REGIME,  7th International Conference on Very High Cycle Fatigue (VHCF7), Dresden, Germany

J. Häfele, C. Hübler, C. G. Gebhardt, R. Rolfes (2017): Reconsidering fatigue limit state load sets for jacket substructures utilizing probability distributions of environmental states,  Proceeding of the Twenty-seventh (2017) International Ocean and Polar Engineering Conference San Francisco, CA, USA, June 25-30, 2017
ISBN: 978-1-880653-97-5

O.Bahrami, S.Tsiapoki, Michael B. Kane, J.P. Lynch, R.Rolfes (2017): Extraction of Environmental and Operational Conditions of Wind Turbine from Tower Response Data for Improved Structural Health Monitoring,  the 11th International Workshop on Structural Health Monitoring (IWSHM 2017), Stanford University, California, USA

Ramin Mirzazadeh, Saeed Eftekhar Azam, Eelco Jansen, Stefano Mariani (2017): Uncertainty quantification in polysilicon MEMS through on-chip testing and reduced-order modelling.,  18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE ), Dresden, Germany
DOI: 10.1109/EuroSimE.2017.7926242

Ricarda Berger, Jan Häfele, Benedikt Hofmeister, Raimund Rolfes (2017): Blend Repair Shape Optimization for Damaged Compressor Blisks,  World Congress of Structural and Multidisciplinary Optimization, Braunschweig

S. Tsiapoki, J.P. Lynch, M.W. Häckell, and R. Rolfes (2017): Improvement of the damage detection performance of a SHM framework using AdaBoost: Validation on an operating wind turbine,  11th International Workshop on Structural Health Monitoring (IWSHM 2017), Stanford University, California, USA

van den Broek, Sander (2017): Effect of spatially varying stochastic material properties on the post-buckling behavior of composite panels using a reduced order model,  Eingereicht / Book of Abstracts: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES), Eindhoven, Netherlands

van den Broek, Sander (2017): Post-buckling behavior of a composite panel with spatially varying stochastic material parameters using Koiter's initial post-buckling method,  Eingereicht / Book of Abstracts: 20th International Conference on Composite Structures, Paris, France

Andreas Ehrmann, Nikolai Penner, Cristian Guillermo Gebhardt, Raimund Rolfes (2016): Offshore Support Structures with Suction Buckets: Parameter Fitting of a Simplified Foundation Model,  Proceedings of the Twenty-sixth International Ocean and Polar Engineering Conference, Rhodes, pp 52-59

B. Arash, B. J. Thijsse, A. Pecenko, A. Simone (2016): A reactive molecular dynamics simulation of hydrolysis degradation in polyamide polymers,  17th European Conference on Composite Materials, Munich, Germany

Benedikt Kriegesmann, Eelco L. Jansen, Raimund Rolfes (2016): Reliability Based Design Optimization of Stiffened Composite Panels,  . MAAXIMUS Final Conference, Dresden

Clemens Hübler, Jan Häfele, Andreas Ehrmann, Raimund Rolfes (2016): Effective consideration of soil characteristics in time domain simulations of bottom fixed offshore wind turbines,  Proceedings of the Twenty-sixth International Ocean and Polar Engineering Conference, Rhodes, pp 127-134.

Jan Häfele, Raimund Rolfes (2016): Approaching the ideal design of jacket substructures for offshore wind turbines with a Particle Swarm Optimization algorithm,  Proceedings of the Twenty-sixth International Ocean and Polar Engineering Conference, Rhodes, pp 156-163

Johannes Fankhänel, Andreas Kempe, Raimund Rolfes (2016): Simulating Atomic Force Microscopy For The Determination Of The Elastic Properties Of Nanoparticle Reinforced Epoxy Resin,  Proceedings of the ECCOMAS Congress, Crete, pp 1-13 Weitere Informationen

Karsten Schröder, Cristian G. Gebhardt and Raimund Rolfes (2016): Damage Localization at Wind Turbine Support Structures Using Sequential Quadratic Programming for Model Updating,  Proceedings of the 8th European Workshop on Structural Health Monitoring (EWSHM), Bilbao, Spain

Ricarda Berger, Timo Rogge, Raimund Rolfes (2016): Fast Methods for Structural Analysis of Gas Turbine Blades with Manufacturing Imperfections,  Deutscher Luft- und Raumfahrtkongress, Braunschweig, URN: urn:nbn:de:101:1-201611114089

S. Tsiapoki, T. Krause, M.W. Häckell, J. Ostermann, R. Rolfes (2016): Combining a vibration-based SHM-scheme and an airborne sound approach for damage detection on wind turbine rotor blades,  In the 8th European Workshop on Structural Health Monitoring (EWSHM 2016), Bilbao, Spain

Steffen Czichon, Raimund Rolfes, Eelco L. Jansen (2016): Numerical Analysis of the Effect of Porosity Defects on Stiffness and Strength of Composite Materials,  MAAXIMUS Final Conference, Dresden

van den Broek, Sander (2016): - Modal Interaction and Mode Switching in Post-buckling Analysis of Plates Using a Multi-mode Finite Element Based Reduced Order Model,  Eingereicht / Book of Abstracts: 19th International Conference on Composite Structures, Porto, Portugal

A. Dean, J. Reinoso, S. Sahraee & R. Rolfes (2015): An invariant-based anisotropic thermo-plastic material model for short fiber reinforced thermoplastics,  20th International Conference on Composites Materials (ICCM20), Copenhagen, Denmark

Alexander Meurer, Mona Dannert, Raimund Rolfes (2015): New Design Approach for Axially Compressed Composite Cylindrical Shells combining the Single Perturbation Load Approach and Probabilistic Analyses,  Address: Braunschweig, Germany. Weitere Informationen

Ayan Haldar, José Reinoso, Eelco Jansen, Raimund Rolfes (2015): MULTISTABILITY OF PLATES THROUGH VARIABLE STIFFNESS COMPOSITES USING RAYLEIGH RITZ METHOD,  Buchtitel: Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2015). Address: Ponta Delgada, Azores, Portugal. Weitere Informationen

Ehrmann, Andreas; Gerendt, Christian; Rolfes, Raimund (2015): Model Calibration for the Soil-Structure-Interaction of an Offshore Wind Turbine Substructure with Suction Buckets,  Extended Abstract in Proceedings of 11th PhD Seminar on Wind Energy in Europe, Stuttgart

Karsten Schröder, Raimund Rolfes (2015): Application of a Finite Element Model Updating Approach to Damage Localization at Offshore Wind Energy Converters,  Buchtitel: Proceedings of the 10th International Workshop on Structural Health Monitoring. Address: Stanford, CA, USA.

Moritz W. Häckell, Raimund Rolfes (2015): Zustandsüberwachung von Windenergieanlagen durch ein modulares Structural Health Monitoring Konzept – Ein Ansatz zur ganzheitlichen Performance Evaluierung,  Buchtitel: VDI-Berichte: 5. VDI-Fachtagung Baudynamik 2015. Herausgeber: VDI Verlag GmbH. Address: Kassel. Band: 2244. Seite(n): 107-118
ISBN: 978-3-18-092244-7

Nikolai Penner, Tanja Grießmann, Raimund Rolfes (2015): Baudynamische Zustandsanalyse von Deckenkonstruktionen,  Buchtitel: VDI-Berichte: 5. VDI-Fachtagung Baudynamik 2015. Herausgeber: VDI Verlag GmbH. Address: Kassel. Band: 2244. Seite(n): 187-196
ISBN: 978-3-18-092244-7

S. Tsiapoki, M.W. Häckell, and R. Rolfes (2015): Monitoring of a 35 m Wind Turbine Rotor Blade During a Fatigue Test by a Modular SHM-Scheme,  The 10th International Workshop on Structural Health Monitoring (IWSHM 2015), Stanford University, California, USA
DOI: 10.12783/SHM2015/347

Tobias Bohne, Tanja Grießmann, Raimund Rolfes (2015): Globale Modellierung eines Offshore-Blasenschleiers,  Buchtitel: Tagungsband - DAGA 2015. Address: Nürnberg, Deutschland.

Alexander Meurer, Julia Thomy, Raimund Rolfes (2014): New Design Approach for Axially Compressed Fiber Composite Cylindrical Shells using a Multistep Sensitivity Method,  Address: Barcelona, Spain. Weitere Informationen

Eelco L. Jansen, Haim Abramovich, Raimund Rolfes (2014): THE DIRECT PREDICTION OF BUCKLING LOADS OF SHELLS UNDER AXIAL COMPRESSION USING VCT - TOWARDS AN UPGRADED APPROACH,  Buchtitel: Proceedings of the 29th Congress of the International Council of the Aeronautical Sciences. Address: St. Petersburg, Russia.

Karsten Schröder, Niklas Scholle, Raimund Rolfes, Ludger Lohaus (2014): An Approach for Local- Global Structural Health Monitoring For Offshore Wind Energy Converters,  Buchtitel: Proceedings of the International Wind Engineering Conference Hannover. Address: Hannover, Germany. Seite(n): 318-325

Michael Kane, Dapeng Zhu, Mitsuhito Hirose, Xinjun Dong, Benjamin Winter, Moritz W. Häckell, Jerome P. Lynch, Yang Wang, A. Swartz (2014): Development of an extensible dual-core wireless sensing node for cyber-physical systems,  Editor: Lynch, Jerome P. and Wang, Kon-Well and Sohn, Hoon. Seite(n): 90611U Weitere Informationen
DOI: 10.1117/12.2045325

Moritz W. Häckell, Raimund Rolfes (2014): A Modular SHM-Scheme for Engineering Structures under Changing Conditions: Application to an Offshore Wind Turbine,  Buchtitel: Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM). Address: Nantes, France.

Q. Wang, B. Arash (2014): Recent studies on applications of nanoresonators in nano-sensors and molecular transportation,  IEEE NANO, Waterloo, Canada

Tanja Grießmann, Nikolai Penner, Arne Schmoch, Raimund Rolfes (2014): Non-Destructive Determination of Serviceability and Load Bearing Capacity of Floor Slabs Using Dynamic Methods,  Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM)

Tobias Bohne, Cristina Díaz-Cereceda, Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2014): NUMERICAL MODELLING OF A BUBBLE CURTAIN,  Buchtitel: Proceedings of the UA2014 2nd Underwater Acoustics Conference and Exhibition. Address: Rhodes, Greece. Seite(n): 209-214
ISBN: 978-618-80725-1-0

Tobias Bohne, Cristina Díaz-Cereceda, Raimund Rolfes (2014): NUMERICAL MODELLING OF BUBBLE CURTAINS,  Buchtitel: Proceedings of the International Wind Engineering Conference Hannover. Address: Hannover, Germany.

Yilan Zhang, Moritz W. Häckell, Jerome Peter Lynch, Raimund Rolfes (2014): Automated Modal Parameter Extraction and Statistical Analysis of the New Carquinez Bridge Response to Ambient Excitations,  Buchtitel: Proceedings of the 32nd International Modal Analysis Conference (IMAC). Address: Orlando, Florida, USA. Weitere Informationen

B. Daum, F.G. Rammerstorfer (2013): Buckling of lamellae in an elastic plastic matrix,  CanCNSM

Eelco L. Jansen, Tanvir Rahman, Alexander Meurer, Raimund Rolfes (2013): Post-Buckling of Dynamically Loaded Composite Panels using a Multi-Mode Reduced Order Model,  Buchtitel: Proceedings of the 19th International Conference on Composite Materials (ICCM19). Address: Montreal, Canada.

J. Reinoso, R. Nabavi, R. Rolfes & E. Jansen (2013): Thermo-mechanical bowing of silicon solar cells during the production procedure,  6th ECCOMAS Conference on Smart Structures and Materials, Politecnico di Torino, Italy

Moritz W. Häckell, Raimund Rolfes (2013): Long-term Monitoring of Modal Parameters for SHM at a 5 MW Offshore Wind Turbine,  Buchtitel: Proceedings of the 9th International Workshop on Structural Health Monitoring. Herausgeber: Chang, F.-K. (Ed.), DEStech Publications Inc.. Address: Stanford, CA, USA. Seite(n): 1310-1317

Roozbeh Nabavi, José Reinoso, Eelco Jansen, Raimund Rolfes (2013): Thermo-mechanical aspects of the co-firing process in multi-crystalline silicon solar cells,  Buchtitel: Proceedings of 28th European Photovoltaic Solar Energy Conference. Address: Paris, France. Seite(n): 1576 - 1582
DOI: 10.4229/28thEUPVSEC2013-2CV.3.32
ISBN: 3-936338-33-7

Sina Berg, Eelco L. Jansen, José Reinoso, Raimund Rolfes (2013): Two-way loose coupling procedure for the analysis of local composite damage,  Buchtitel: Proceedings of the 4th ECCOMAS Thematic Conference on the Mechanical Response of Composites (Composites 2013), USB, Paper ID 34. Editor: Suleman, A. and Camanho, P.. Address: S. Miguel, Azores.

B. Daum, F.G. Rammerstorfer, F.D. Fischer, G. Dehm (2012): Buckling phenomena associated with micropillar testing,  ECCOMAS

Benedikt Kriegesmann, Mark W. Hilburger, Raimund Rolfes (2012): The Effects of Geometric and Loading Imperfections on the Response and Lower-Bound Buckling Load of a Compression-Loaded Cylindrical Shell,  Buchtitel: Proceedings 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Address: Honolulu, USA. Seite(n): AIAA Paper 2012-1864 Weitere Informationen

Benjamin M. Reil, Raimund Rolfes (2012): Development of a Design and Simulation Framework for Offshore Wind Turbine Support Structures,  Buchtitel: Proceedings DEWEK 2012 German Wind Energy Conference. Herausgeber: Deutsches Windenergie Institut. Address: Bremen.

Eelco L. Jansen, Tanvir Rahman, Raimund Rolfes (2012): DYNAMIC STABILITY ANALYSIS OF CYLINDRICAL SHELLS USING A REDUCED ORDER MODEL,  Buchtitel: Proceedings of the 12th European Conference on Space Structures, Materials & Environmental Testing. Herausgeber: ESA. Address: Noordwijk, Netherlands. Band: SP-691.

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2012): Underwater sound mitigation of bubble curtains with different bubble size distributions,  Buchtitel: European conference on Underwater Acoustics. Address: Edinburgh, UK. Seite(n): 1895-1902

Moritz B. Fricke, Raimund Rolfes (2012): Sonartransponder für Offshore-Windparks: Forschungsergebnisse und Ausblick,  Buchtitel: Schall und Schwingungen, Wellen und Turbulenz in sensibler Umgebung. Address: Kiel.
ISBN: 978-3-935938-94-5

Moritz Fricke, Raimund Rolfes (2012): Erforschung von Sonartranspondern für Offshore-Windparks und technische Integration in ein Gesamtkonzept,  Buchtitel: Fortschritte der Akustik. Address: Darmstadt.
ISBN: 978-3-939296-04-1

Thomas Pahn, Jason Jonkman, Raimund Rolfes, Amy Robertson (2012): Inverse load calculation of wind turbine support structures – a numerical verification using the comprehensive simulation code FAST,  Buchtitel: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference. Address: Honolulu, Hawaii, USA. Seite(n): AIAA Paper 2012-1735 Weitere Informationen

Thomas Pahn, Raimund Rolfes (2012): Inverse Lastermittlung zur Restlebensdauerprognose von Tragstrukturen für Windenergieanlagen,  Buchtitel: 4. VDI-Fachtagung Baudynamik. Address: Kassel. Band: VDI-Berichte 2160. Seite(n): 281-291
ISBN: 978-3-18-092160-0

Timo Rogge, Raimund Rolfes (2012): Stochastische Untersuchungen regenerationsbedingter Imperfektionen einer Turbinenschaufel - Modellierung des deterministischen Modells zur effizienten Berechnung des Schwingungs- und Festigkeitsverhaltens,  Buchtitel: 5. Dresdner-Probabilistik-Workshop 27.-28. September. Address: Dresden. Weitere Informationen

Waddy T. Haynie, Mark W. Hilburger, Massimiliano Bogge, Benedikt Kriegesmann (2012): Validation of Lower-Bound Estimates for Compression-Loaded Cylindrical Shells,  Buchtitel: Proceedings 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Address: Honolulu, USA. Seite(n): AIAA Paper 2012-1689 Weitere Informationen

Andreas Hohl, Benedikt Kriegesmann, Jörg Wallaschek, Lars Panning (2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed Disks,  Buchtitel: Proceedings of ASME Turbo Expo 2011. Address: Vancouver, Canada. Seite(n): 1159-1170
ISBN: 978-0-7918-5466-2

Benedikt Kriegesmann, Raimund Rolfes, Eelco L. Jansen, Isaac Elishakoff, Christian Hühne, Alexander Kling (2011): Design Optimization of Composite Cylindrical Shells Under Uncertainty,  Buchtitel: Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Editor: Rolfes, Raimund and Jansen, Eelco. Address: Hannover, Germany. Seite(n): 431-438
ISBN: 978-3-00-035855-5

David Chrupalla, Sina Berg, Luise Kärger, Mathias Doreille, Thomas Ludwig, Eelco L. Jansen, Raimund Rolfes, Alexander Kling (2011): A Homogenization-Based Two-Way Multiscale Approach for Composite Structures,  Buchtitel: Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Editor: Rolfes, Raimund and Jansen, Eelco L.. Address: Hannover, Germany. Seite(n): 263-270
ISBN: 978-3-00-035855-5

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2011): Use of bubble curtains to mitigate hydro sound levels at offshore construction sites,  Buchtitel: Proceedings of the 4th International Conference and Exhibition on Underwater Acoustic Measurements: Technologies & Results, 20-24 June 2011. Address: Kos, Greece. Seite(n): 779-784 Weitere Informationen

Raimund Rolfes, Moritz W. Häckell, Gerrit Haake (2011): Automated System Identification and Validation of Numerical Models of Offshore Wind Turbines as Basis for SHM-Analysis,  Buchtitel: Proceedings of the 8th International Workshop on Structural Health Monitoring. Address: Stanford, CA, USA. Seite(n): 2149-2156

Raimund Rolfes, Steffen Czichon, Matthias Vogler, Benedikt Kriegesmann, Heiko Krüger, Eelco L. Jansen (2011): Structural Mechanics Simulation of Composites - Where Do We Stand Today?,  Buchtitel: NAFEMS-Seminar: Progress in Simulating Composites. Address: Wiesbaden, Germany. Seite(n): Paper 1
ISBN: 978-1-874376-63-7

Steffen Czichon, Dominik Jürgens, Wilfried V. Liebig, Raimund Rolfes, Rainer Niek, Karl Schulte (2011): Progressive Failure Analysis of Carbon Fiber Reinforced Polymers with Porosity Defects using a Continuum Damage Approach,  Buchtitel: Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Herausgeber: Leibniz Universität Hannover, Institute of Structural Analysis. Editor: Rolfes, Raimund and Jansen, Eelco L.. Seite(n): 611-618
ISBN: 978-3-00-035855-5

Stephan Zerbst, Karl-Heinz Haase, Raimund Rolfes, Martin Knops (2011): Novel Sensor Concept for Monitoring of Wind Turbine Blades,  Buchtitel: Proceedings of the 8th International Workshop on Structural Health Monitoring 2011. Address: San Francisco. Band: 2. Seite(n): 2157-2166
ISBN: 978-1-60595-053-2

Tanja Grießmann (2011): Identifikation von globalen und lokalen Steifigkeiten von Stahlbeton-konstruktionen – Ergebnisse des Forschungsvorhabens,  Buchtitel: Baustatik-Baupraxis 11. Editor: Hofstetter, G. and Theiner, Y. and Beer, G. and Dünser, C.. Address: Institut für Baustatik. Technische Universität Graz.. Seite(n): 115-122
ISBN: 978-3-85125-115-9

Tanvir Rahman, Eelco L. Jansen, Zafer Gürdal (2011): Post-Buckling Analysis of Stiffened Composite Panels Using a Finite Element Based Reduction Method,  Buchtitel: Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Address: Hannover, Germany. Seite(n): 511-518
ISBN: 978-3-00-035855-5

Benedikt Kriegesmann, Raimund Rolfes, Christian Hühne, Alexander Kling (2010): Probabilistic Second-Order Third-Moment Approach for Design of Axially Compressed Composite Shells,  Buchtitel: Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Address: Orlando, Florida, USA. Seite(n): AIAA--2010--2534

Heiko Krüger, Raimund Rolfes (2010): A Physically Motivated and Layer-based Fatigue Concept for Fiber- Reinforced Plastics,  Buchtitel: Proceedings of the Tenth International Conference on Computational Structures Technology & The Seventh International Conference on Engineering Computational Technology. Address: Valencia, Spain, 14.-17. September 2010. Seite(n): Paper 79

Heiko Krüger, Raimund Rolfes, Eelco L. Jansen (2010): Layer- and Energy-based Fatigue Degradation Concept for Fibre-Reinforced-Plastics Considering Different Failure Modes,  Buchtitel: 10.-11. November 2010. Address: Wiesbaden, Deutschland. Institut: 978-1-874376-61-3. Seite(n): Paper 15

Heiko Krüger, Raimund Rolfes, Eelco L. Jansen (2010): An Innovative Energy-Based Fatigue Approach for Composites Combining Failure Mechanisms, Strength and Stiffness Degradation,  Buchtitel: International Conference on Fatigue of Composites (ICFC5). Herausgeber: Nanjing University of Aeronautics and Astronautics. Address: Nanjing, China, 16-19 October 2010. Seite(n): 163-174

Raimund Rolfes, Moritz W. Häckell, Johannes Reetz, Gerrit Haake (2010): Damage Identification at Offshore Wind Energy Converters Using the Multiparameter Eigenvalue Problem,  Buchtitel: Proceedings of the 10th German Wind Energy Conference. Address: Bremen. Seite(n): (CD-ROM)

Raimund Rolfes, Steffen Czichon, Matthias Vogler, Eelco L. Jansen (2010): Simulating the Effect of Porosities on Stiffness and Strength of Composite Materials,  Buchtitel: Proceedings of the Tenth International Conference on Computational Structures Technology. Address: Valencia, Spain. Seite(n): Paper 272
DOI: 10.4203/ccp.93.272

Thomas Pahn, Raimund Rolfes, Martin Kohlmeier (2010): System identification of a jacket support structure for a 5 MW offshore wind turbine due to artificial and ambient excitation,  Buchtitel: Proceedings TORQUE 2010, The science of Making Torque from Wind. Address: Heraklion, Crete, Greece. Seite(n): 769-780

Gerrit Haake, Raimund Rolfes, Peter Schaumann, Torsten Schlurmann, Ludger Lohaus, Martin Achmus (2009): Research on Support Structures in the German Offshore Wind Farm alpha ventus,  Buchtitel: EWEC 2009, 16.-19. März 2009. Address: Marseille. Seite(n): (CD-ROM) Weitere Informationen

Raimund Rolfes, Benedikt Kriegesmann, Christian Hühne (2009): A Probabilistic Based Design Load for Composite Shells with Non-Traditional Imperfections,  Buchtitel: 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Address: London, UK. Seite(n): (CD-ROM)

Raimund Rolfes, Peter Schaumann, Torsten Schlurmann, Martin Achmus, Gerrit Haake, Holger Huhn (2009): GIGAWIND alpha ventus – Research on Support Structures in the Offshore test site alpha ventus,  Buchtitel: Proceedings of the Third Science Days on the Utilization of Offshore Wind Energy by the Federal Environment Ministry. Herausgeber: BMU. Address: Oldenburg. Seite(n): 31-36 Weitere Informationen

Tanja Grießmann, Raimund Rolfes (2009): Tribünenkonstruktionen aus Stahlbeton unter dynamischen Lasten,  Buchtitel: 3. VDI-Fachtagung: Baudynamik. Address: Kassel, Germany. Band: VDI-Bericht 2063. Seite(n): 209-222

Christian Hühne, Benedikt Kriegesmann, Raimund Rolfes, Johann Arbocz, Jan Teßmer (2008): Probabilistic Approach to Determine the Lower Limit of Buckling Load of Composite Shells,  Buchtitel: Proceedings 2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures with COCOMAT Workshop. Address: Braunschweig, Germany. Seite(n): (CD-ROM)

Karl-Heinz Elmer (2008): Messung, Ausbreitung und Minderung von Hydroschall beim Bau von OWEA,  Buchtitel: Messen in der Geotechnik 2008, Mitteilung des Instituts für Grundbau und Bodenmechanik, TU Braunschweig. Address: Braunschweig, Germany. Band: 87.

Lutz Nasdala, Raimund Rolfes (2008): Berechnung von Nanostrukturen mit der molekulardynamischen Finite-Elemente-Methode unter Verwendung von User-Elementroutinen,  Buchtitel: 20. Deutschsprachige Abaqus-Benutzerkonferenz, 22.-23. September 2008, Bad Homburg. Herausgeber: Abaqus Deutschland GmbH. Seite(n): 119-138

Lutz Nasdala, Raimund Rolfes (2008): Berechnung von Nanostrukturen mit der molekulardynamischen Finite Elemente Methode unter Verwendung von User-Elementenroutinen,  Buchtitel: 20. Deutschsprachige Abaqus-Benutzerkonferenz, 22.-23. September 2008. Address: Bad Homburg, Germany. Seite(n): 119-138

M. Fritsch, J. Stahlmann, K. H. Elmer (2008): Identification of stress wave phenomena caused by soil-pile interaction,  Buchtitel: The application of stress-wave theory to piles: science, technology and practice: proceedings of the 8th International Conference on the Application of Stress-Wave Theory to Piles. Address: Lisbon, Portugal. Seite(n): 99-106

Raimund Rolfes, Holger Huhn, Peter Schaumann, Torsten Schlurmann, Ludger Lohaus, Martin Achmus, Gerrit Haake (2008): Support Structures for Offshore Wind Turbines - A Holistic Design Concept,  Buchtitel: Proceedings DEWEK 2008. Address: Bremen. Seite(n): (CD-ROM) Weitere Informationen

Gerald Ernst, Matthias Vogler, Christian Hühne, Raimund Rolfes (2007): Multiscale Simulation for Stiffnesses and Strengths of Textile Composites,  Buchtitel: NAFEMS Seminar: Simulating Composite: Materials and Structures. Address: Bad Kissingen. Seite(n): 1-12
ISBN: 978-1-874376-28-6

Gerrit Haake, Wolf-Jürgen Gerasch, Raimund Rolfes (2007): Tragstruktur – Dynamik des Gesamtmodells und Systemidentifikation,  Buchtitel: Tagungsband zum 5. Symposium Offshore-Windenergie: Bau- und umwelttechnische Aspekte. Address: Hannover. Weitere Informationen

I. Gerasch, W.-J. Gerasch (2007): Vorschlag für die Formulierung dynamischer Lasten bei leichten Deckensystemen mit Eigenfrequenzen über 7,5 Hz,  Buchtitel: D-A-CH-Tagung 2007. Address: Wien, Austria.

Jens Tambke, Bernhard Lange, Kurt Rohrig, Peter Quell, Martin Knops, Matthias Heinicke, Andreas Rettenmeier, Martin Kühn, Werner Rücker, Matthias Baeßler, Raimund Rolfes, Gerrit Haake, Berthold Hahn, Michael Benesch, Hermann van Radecke, Kristin Finger, Thomas Neumann, Kai Herklotz (2007): Offshore Wind Energy Research in Germany – RAVE – Research at Alpha VEntus,  Buchtitel: Proceedings European Offshore Wind (EOW 2007). Address: Berlin, Germany. Weitere Informationen

K.-H. Elmer (2007): Schallemissionen beim Rammen von Offshore-Fundamenten,  Buchtitel: 2. Wissenschaftstage des Bundesumweltministeriums zur Offshore-Windenergienutzung. Address: BMU, Berlin, Germany. Seite(n): 127-138

K.-H. Elmer, W.-J. Gerasch (2007): Schallemission und Minderungsmaßnahmen beim Bau von Offshore-Windenergieanlagen,  Buchtitel: Tagungsband zum 5. Symposium Offshore-Windenergie: Bau- und umwelttechnische Aspekte. Address: Hannover, Germany. Weitere Informationen

Matthias Vogler, Gerald Ernst, Christian Hühne, Raimund Rolfes (2007): A Transversely Isotropic Plasticity Model with Damage for Fiber-Reinforced Plastics and Textile Composites,  Buchtitel: NAFEMS-Seminar: Simulating Composite: Materials and Structures. Address: Bad Kissingen. Seite(n): 1-14
ISBN: 978-1-874376-28-6

Matthias Vogler, Stefan Kolling, Raimund Rolfes (2007): Transversely isotropic plasticity with application to fiber-reinforced plastics,  Buchtitel: Tagungsband 6. LS-DYNA Forum. Address: Frankenthal. Seite(n): D--II--55--73 Weitere Informationen

Petri Kere, Christian Hühne, Mikko Lyly (2007): Geometrically nonlinear analysis of imperfect cylindrical composite shells using Reissner-Mindlin-von Kármán type shell facet model,  Buchtitel: Proceedings Sixth International Conference on Composite Science and Technology. Address: Durban, South Africa. Seite(n): 22-24

Raimund Rolfes, Nina Wieczorek (2007): Brückenbau leicht gemacht - GFK im Bauwesen,  Buchtitel: 11. Dresdner Baustatik-Seminar - Innovative Materialien und Tragwerke. Seite(n): 29-53

Raimund Rolfes, Stephan Zerbst, Gerrit Haake, Johannes Reetz, Jerome Peter Lynch (2007): Integral SHM-System for Offshore Wind Turbines using Smart Wireless Sensors,  Buchtitel: Proceedings of the 6th International Workshop on Structural Health Monitoring. Address: Stanford, CA, USA. Band: 2. Seite(n): 1889-1896

Stephan Zerbst, Johannes Reetz, Wolf-Jürgen Gerasch, Raimund Rolfes (2007): Methoden zur Schadenserkennung an Tragstrukturen von Windenergieanlagen,  Buchtitel: Tagungsband zum 5. Symposium Offshore-Windenergie: Bau- und umwelttechnische Aspekte. Address: Hannover, Germany. Weitere Informationen

K.-H. Elmer, W.-J. Gerasch, T. Neumann, J. Gabriel, K. Betke, M. Schultz v. Glahn (2006): Measurement and Reduction of Offshore Wind Turbine Construction Noise,  Buchtitel: DEWEK 2006.

N. Bachmann, W.-J. Gerasch (2006): Einbau einer neuen Zuschauertribüne in die Stadthalle Bremen (AWD-Dome),  Buchtitel: 2. VDI-Fachtagung: Baudynamik. Band: VDI-Bericht 1941. Seite(n): 359-374

Nina Wieczorek (2006): Untersuchung des dynamischen Verhaltens einer Fußgängerbrücke aus GFK,  Buchtitel: VDI-Fachtagung: Baudynamik. Band: VDI-Bericht 1941. Seite(n): 597-610

Raimund Rolfes, Gerald Ernst, Daniel Hartung, Jan Teßmer (2006): Strength of Textile Composites - A Voxel Based Continuum Damage Mechanics Approach,  Buchtitel: Computational Mechanics - Solids, Structures and Coupled Problems. Herausgeber: Springer. Editor: Soares, C. A. Mota and Martins, J. A. C. and Rodrigues, H. C. and Ambrosio, J. A. C.. Seite(n): 497-520
ISBN: 10 1-4020-4978-1

Raimund Rolfes, Wolf-Jürgen Gerasch, Gerrit Haake, Johannes Reetz, Stephan Zerbst (2006): Early Damage Detection System for Towers an Rotor Blades of Offshore Wind Turbines,  Buchtitel: Proceedings of the Third European Workshop on Structural Health Monitoring (EWSHM). Herausgeber: DEStech Publications Inc. Address: Lancaster (U.S.A.). Seite(n): 455-462

Christian Hühne, Raimund Rolfes, Jan Tessmer (2005): A New Approach for Robust Design of Composite Cylindrical Shells Under Axial Compression,  Buchtitel: Proceedings European Conference on Spacecraft Structures, Materials, and Mechanical Testing. Address: Noordwijk, The Netherlands. Seite(n): 1-8

Gerrit Haake, Wolf-Jürgen Gerasch, Raimund Rolfes (2005): Identifikation der Eigenschwingungsgrößen von OWEA mit Hilfe der natürlichen Erregung,  Buchtitel: Tagungsband zum 4. Symposium Offshore-Windenergie: Bau- und umwelttechnische Aspekte. Address: Hannover, Germany.

Heinrich Rothert, Gerald Ernst, Lutz Nasdala (2005): Stability Problems at Nanoscale,  Buchtitel: Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing. Herausgeber: Civil-Comp Press. Editor: Topping, Barry H. V.. Seite(n): Paper 135

Heinrich Rothert, Gerald Ernst, Lutz Nasdala (2005): Spatial Structures at Nanoscale,  Buchtitel: Proceedings of the IASS 2005 Congress. Herausgeber: International Association for Shell and Spatial Structures (IASS). Editor: Mihailescu, M. and Mircea, C.. Band: 1. Seite(n): 217-224

K. Betke, K.-H. Elmer, J. Gabriel, W.-J. Gerasch, R. Matuschek, T. Neumann (2005): Underwater Noise Emissions of Offshore Wind Turbines,  Buchtitel: First International Meeting on Wind Turbine Noise: Perspectives for Control. Address: Berlin, Germany. Seite(n): (CD-ROM)

Lutz Nasdala, Gerald Ernst, Kai-Uwe Schröder, Raimund Rolfes (2005): Materialmodelle für Verbunde – Textilverstärkte Duromere, Beton, Gefüllte Elastomere –,  Buchtitel: Multifunktionale, leichte und langlebige Tragstrukturen der Zukunft – Beiträge aus dem Institut für Statik und Dynamik sowie der Industrie. Herausgeber: Institut für Statik und Dynamik, Universität Hannover. Editor: Rolfes, R. and Hühne, C.. Seite(n): 37-40

Richard Degenhardt, Rolf Zimmermann, Raimund Rolfes, Klaus Rohwer (2005): Improved Material Exploitation of Composite Airframe Structures by Accurate Simulation of Postbuckling and Collapse – The Projects POSICOSS and COCOMAT,  Buchtitel: Proceedings of the 11th Australian International Aerospace Congress. Address: Melbourne, Australia. Seite(n): (CD-ROM)

Robert Zem?ík, Raimund Rolfes, Michael Rose, Jan Teßmer (2005): High-Performance 4-Node Shell Element with Piezoelectric Coupling,  Buchtitel: Proceedings II. ECCOMAS Thematic Conference on Smart Structures and Materials. Herausgeber: Instituto Superior Técnico. Address: Lisbon, Portugal. Seite(n): 1-14

S. Pernot, M. Glöckner, T. Grießmann (2005): Experimental dynamics of a four-storey building coupled with a nonlinear sink,  Buchtitel: Fifth Euromech Nonlinear Dynamics Conference. Address: Eindhoven, Netherlands. Seite(n): (CD-ROM)

T. Wanzek, K.-U. Schröder, H. Rothert (2005): Betrachtung von Detailpunkten der einteiligen Verbundbrücke Seßlestal,  Buchtitel: Baustatik - Baupraxis 9 Technische Universität Dresden, Institut für Statik und Dynamik der Tragwerke. Seite(n): 211-222

Tanja Grießmann (2005): Tragfähigkeit und Gebrauchstauglichkeit schwingbelasteter Bauwerke – Beispiele aus der Praxis,  Buchtitel: Eröffnungskolloquium des Institut für Statik und Dynamik: Multifunktionale, leichte und langlebige Tragstrukturen der Zukunft. Herausgeber: Institut für Statik und Dynamik, Universität Hannover. Address: Hannover, Germany. Seite(n): 21-23

Tom Spröwitz, Jan Teßmer, Raimund Rolfes (2005): Thermal Homogenization of Perforated Sandwich Structures for Space Antennas,  Buchtitel: Proceedings of the 6th International Congress on Thermal Stresses. Editor: Ziegler, F. and Heuer, R. and Adam, C.. Address: Wien, Austria. Band: 2. Seite(n): 791-794
ISBN: 3-901167-12

K. Rohwer, R. Rolfes (2004): Stress Analysis of Laminated Structures from Fibre-Reinforced Composite Material,  Editor: Iyengar, N.G.R. and Kumar, A.. Address: Kanpur. Reihe: . Seite(n): 21-42

R. Rolfes, C. Hühne, A. Kling, H. Temmen, B. Geier, H. Klein, J. Tessmer, R. Zimmermann (2004): Advances in Computational Stability Analysis of Thin-Walled Aerospace Structures Regarding Postbuckling, Robust Design and Dynamic Loading,  Editor: Loughlan, J.. Address: Loughborough. Reihe: .
ISBN: 0 7503 1006 5

R. Rolfes, C. Sickinger, P. Wierach, A. Wetzel, L. Kärger, E. Breitbach (2004): Advances, Current Developments and Future Trends in Thin-Walled Composite Aerospace Structural Systems,  Herausgeber: Canopus Publishing Limited. Editor: Loughlan, J.. Reihe: .
ISBN: ISBN 0 9537868 9 7

R. Rolfes, J. Tessmer, R. Degenhardt, H. Temmen, P. Bürmann, J. Juhasz (2004): New Design Tools for Lightweight Aerospace Structures,  Herausgeber: Saxe-Coburg Publications. Editor: Topping, B.H.V. and Mota Soares, C.A.. Address: Stirling (Scotland). Reihe: .
ISBN: 1-874672-21-0

J. Tessmer, S. Weitz, R. Rolfes, J. Ackva, T. de Vries (2003): Thermal Analysis Computation and Experimental Validation of Fiber Metal Laminates,  Buchtitel: Proceedings Fifth International Congress on Thermal Stresses, 8.-11. Juni 2003. Address: Blacksburg.

J.W.H. Yap, M.L. Scott, D. Hachenberg, J. Baaran, R. Rolfes (2003): Composite Stiffened Panel Impact Damage Simulations and Parametric Studies,  Editor: Mee, David J.. Address: Brisbane. Reihe: .
ISBN: 085-825-733-5

Christian Hühne, Raimund Rolfes (2002): Stabilitätsanalyse perfekter und imperfekter Kreiszylinderschalen aus Faserverbundwerkstoff,  Buchtitel: Proceedings 14. deutschsprachiges ABAQUS Anwendertreffen, 23.-24. September 2002. Address: Wiesbaden, Germany. Seite(n): 1-10

Christian Hühne, Rolf Zimmermann, Raimund Rolfes, Bodo Geier (2002): Sensitivities to Geometrical and Loading Imperfections on Buckling of Composite Cylindrical Shells,  Buchtitel: Proceedings European Conference on Spacecraft Structures, Materials and Mechanical Testing, 11.-13. Dezember 2002. Address: Toulouse, France.

Ph. Nolden, R. Rolfes, G. Kuhlmann (2002): Efficient Transverse Stress Calculation and Failure Prediction in Arbitrarily Curved Shell Structures Using TRAVEST,  Buchtitel: Proceedings of the MSC.Software 2002 Worldwide Aerospace Conference, 8.-10. April 2002. Address: Toulouse.

R. Rolfes, A. Kling (2002): Validierung nichtlinearer FEM-Analysen stringerversteifter CFK-Paneele,  Buchtitel: Proceedings NAFEMS-Seminar on Validation of FEM-Analysis – Models and Results, 13. November 2002. Address: Wiesbaden.

R. Rolfes, G. Kuhlmann (2002): A Hierarchic 3D Finite Element for Laminated Composites,  Buchtitel: Proceedings of the MSC.Software 2002 Worldwide Aerospace Conference, 8.-10. April 2002. Address: Toulouse.

R. Rolfes, J. Juhasz, J. Baaran, G. Kuhlmann, A. Kling, Ph. Nolden (2002): High Performance Tools for Failure, Damage Tolerance and Stability Analysis of Composite Structures,  Editor: Mang, H.A. and Rammerstorfer, F.G. and Eberhardsteiner, J.. Address: Wien. Reihe: . Weitere Informationen
ISBN: 3-9501554-0-6

J. Baaran, H.-C. Goetting, R. Rolfes, M. Gaedke (2001): Schadenstoleranz und Schwingfestigkeit neuer textiler Faserverbunde für Hochleistungsstrukturen: Experiment und Simulation,  Herausgeber: Deutscher Verband für Materialforschung und –prüfung e.V.. Reihe: . Seite(n): 339-348

R. Rolfes, J. Baaran, M. Gaedke, H.-C- Goetting (2001): Impact Behavior and Residual Strength of Sandwich Structural Elements under Static and Fatigue Loading,  Buchtitel: 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Address: Seattle.
ISBN: 1-56347-491-3

R. Rolfes, J. Noack, F. Ruiz-Valdepenas, M. Taeschner, R. Zimmermann (2001): Fast Analysis Tools for Concurrent/Integrated Engineering of Composite Airframe Structures,  Editor: Mistree, F. and Belegundu, A.D.. Address: Banff. Reihe: . Seite(n): 331-338

R. Rolfes, J. Tessmer (2001): 2D Finite Element Formulation for 3D Temperature Analysis of Layered Hybrid Structures,  Buchtitel: Proceedings NAFEMS-Seminar on Numerical Simulation of Heat Transfer, 9.-10. Mai. Address: Wiesbaden. Seite(n): 1-5

J. Baaran, M. Gaedke, R. Rolfes (2000): Schlagschädigung und Restfestigkeit von Faserverbunden,  Buchtitel: 6.GAMM-/GACM Seminar ”Bruch- und Schädigungsmechanik – Modelle und numerische Simulation -, 9.-10. März 2000. Address: Erlangen.

D. Petersen, R. Rolfes, J. Noack, B. Hildebrandt (1999): Thermo-Mechanical Behaviour of Large Transport Aircraft Structures,  Buchtitel: Proceedings ODAS 99 (ONERA-DLR Aerospace Symposium), 21.-24. Juni 1999. Address: Paris.

J. Noack, R. Rolfes (1999): Efficient Thermal Analysis of Hot Structures Using New Finite Elements,  Buchtitel: Proceedings European Conference on Spacecraft Structures, Materials, and Mechanical Testing, 4.-6. November 1998. Address: Braunschweig. Seite(n): ESA SP--428, 117--122

P. Netz, R. Rolfes (1999): Lightweight Composite Feedlines for Future Launchers,  Buchtitel: Proceedings European Conference on Spacecraft Structures, Materials, and Mechanical Testing, 4.-6. November 1998. Address: Braunschweig. Seite(n): ESA SP--428, 81--87

R. Rolfes, S. Tacke, R. Zimmermann (1999): Development and Experimental Verification of FE-Model for Stringer-Stiffened Fibre Com-posite Panels under Combined Thermal and Mechanical Loading Conditions,  Buchtitel: Proceedings European Conference on Spacecraft Structures, Materials, and Mechanical Testing, 4.-6. November 1998. Address: Braunschweig. Band: ESA SP-428. Seite(n): 109-115

R. Rolfes (1998): Ein neuer Analyseprozeß für thermo-mechanisch belastete Faserverbundstrukturen,  Buchtitel: Theoretische und numerische Methoden in der angewandten Mechanik mit Praxisbeispielen, Festschrift anläßlich der Emeritierung von Prof. Dr.-Ing. Dr.-Ing. E.h. Dr. h.c. mult. E. Stein, Forschungs- und Seminarberichte aus dem Bereich der Mechanik der Universität Hannover, Report-Nr. F98/4. Editor: Mahnken, R..

R. Rolfes, A.K. Noor, K. Rohwer (1997): Efficient Calculation of Transverse Stresses in Composite Plates,  Buchtitel: MSC Aerospace Users´ Conference, 17.-20. November. Address: Newport Beach.

R. Rolfes, K. Rohwer (1997): Three-dimensional Stress Analysis of Composite Plates and Shells for Improved Failure Prediction,  Buchtitel: Jahrestagung der GAMM, Minisymposium ”Theory and Computation of Damage and Failure in Composites”, 24.-27. März 1997. Address: Regensburg.

K. Schmidt, R. Rolfes (1996): Experimental Verification of Special Finite Elements for Heat Conduction in Highly Anisotropic Laminated Structure,  Buchtitel: Proceedings of the Seventh European Conference on Composite Materials (ECCM7). Address: London, UK. Band: 2. Seite(n): 277-282

R. Rolfes, K. Schmidt (1995): Experimentelle Überprüfung von finiten Elementen für Wärmeleitung in Faserverbundstrukturen,  Buchtitel: MSC Anwenderkonferenz, 21.-22. September. Address: Frankfurt/M.

J. Block, M. Froevel, H. Klein, D. Petersen, R. Rolfes, K. Schmidt, H. Twardy (1993): Investigations on Thermally Resistant Structures for Future Aerospace Vehicles,  Buchtitel: AIAA/DGLR Fifth International Aerospace Planes and Hypersonics Technologies Conference, 30. November - 3. Dezember 1993. Address: München. Seite(n): AIAA--93--5086

R. Rolfes (1992): Nonlinear Transient Thermal Analysis of Composite Structures,  Editor: Hirsch, Ch. and Zienkiewicz, O.C. and Onate, E.. Address: Brüssel. Reihe: . Seite(n): 653-659

R. Rolfes (1991): Higher Order Theory and Finite Element for Heat Conduction in Composites,  Editor: Lewis, R.W. and Chin, J.H. and Homsy, G.M.. Address: Stanford, U.S.A. Band: 7. Reihe: 7. Seite(n): 880-889

R. Rolfes (1990): Efficient Thermal Analysis of Anisotropic Composite Plates Using New Finite Elements,  Editor: Füller, J. and Grüninger, G. and Schulte, K. and Bunsell, A.R. and Massiah, A.. Address: Stuttgart. Reihe: . Seite(n): 743-748

R. Rolfes (1990): A New Finite Element for Thermal Analysis of Laminated Composite Plates,  Buchtitel: Proceedings of the 17th MSC European Users Conference, 25.-28. September 1990. Address: Paris. Seite(n): Vortrag Nr. 30

D. Anastasio, J. Dietrich, J.-P. Noël, G. Kerschen, S. Marchesiello, J. Häfele, C. G. Gebhardt, R. Rolfes (2020): Dynamics of Geometrically-Nonlinear Beam Structures, Part 1: Numerical Modeling,  Nonlinear Structures and Systems, Volume 1 pp 213-216
DOI: 10.1007/978-3-030-12391-8_28

D. Anastasio, J. Dietrich, J.-P. Noël, G. Kerschen, S. Marchesiello, J. Häfele, C. G. Gebhardt, R. Rolfes (2020): Dynamics of Geometrically-Nonlinear Beam Structures, Part 2: Experimental Analysis,  Nonlinear Structures and Systems, Volume 1 pp 217-220
DOI: doi:10.1007/978-3-030-12391-8_29

N. Safdar, B. Daum, R. Rolfes, O. Allix (2020): The Representation of Fiber Misalignment Distribution in Numerical Modeling of Compressive Failure of Fiber Reinforced Polymers,  Virtual Design and Validation
DOI: 10.1017/978-3-030-38156-1_8

A. Dean, J. Reinoso, S. Sahraee, B. Daum & R. Rolfes (2018): Invariant-based finite strain anisotropic material model for fiber-reinforced composites,  Sorić J., Wriggers P., Allix O. (eds) Multiscale Modeling of Heterogeneous Structures. Lecture Notes in Applied and Computational Mechanics, vol 86. Springer, Cham
ISBN: 9783319654621

A. Ehrmann, C. G. Gebhardt, R. Rolfes (2018): Determination of Representative Offshore Wind Turbine Locations for Fatigue Load Monitoring by Means of Hierarchical Clustering, Rotating Machinery, Vibro-Acousitics & Laser Vibrometry.,  Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, Volume 7, pp 149-152, Springer, Orlando
ISBN: 978-3-319-74693-7

H. Madhusoodanan, E. Jansen, R. Rolfes (2018): A physically based fatigue damage model for simulating three-dimensional stress states in composites under very high cycle fatigue loading,  Christ HJ. (eds) Fatigue of Materials at Very High Numbers of Loading Cycles. Springer Spektrum, Wiesbaden
DOI: 10.1007/978-3-658-24531-3_24
ISBN: 978-3-658-24530-6

Eelco Jansen (2017): Vibrations of composite shell-type structures,  Stability and Vibrations of Thin Walled Composite Structures 12/2017: Seite(n) 429-459
DOI: 10.1016/B978-0-08-100410-4.00008-9
ISBN: 9780081004104

Michaela Herr, Roland Ewert, Benjamin Faßmann, Christof Rautmann, Susanne Martens, Claas-Hinrik Rohardt, Alexandre Suryadi (2017): Noise Reduction Technologies for Wind Turbine,  Notes on Numerical Fluid Mechanics and Multidisciplinary Design, New Results in Numerical and Experimental Fluid Mechanics XI. Editor: A. Dillmann, G. Heller, E. Krämer, R. Radespiel, and C. Wagner, Springer, Berlin-Heidelberg-New York
ISBN: ISBN 978-3-319-64518-6

Tanvir Rahman, Eelco Jansen (2017): Computational aspects for stability and vibrations of thin-walled composite structures,  Stability and Vibrations of Thin Walled Composite Structures, Seite(n) 693-734
DOI: 10.1016/B978-0-08-100410-4.00014-4
ISBN: 9780081004104

Tanvir Rahman, Eelco Jansen (2017): The influence of initial geometric imperfections on composite shell stability and vibrations,  Stability and Vibrations of Thin Walled Composite Structures, Seite(n) 509-548
DOI: 1016/B978-0-08-100410-4.00010-7
ISBN: 9780081004104

Raimund Rolfes, Johannes Fankhänel, Andreas Kempe (2016): Braunschweigische Wissenschaftliche Gesellschaft - Jahrbuch 2016,  Herausgeber: J. Cramer Verlag, Braunschweig
ISBN: 978-3-934656-35-2

Raimund Rolfes, Stavroula Tsiapoki, Moritz W. Häckell (2014): Sensing Solutions for Assessing and Monitoring Wind Turbines,  Sensor Technologies for Civil Infrastructures, Herausgeber: Elsevier, Woodhead Publishing, Editor: Wang, Ming L. and Lynch, Jerome P., Amsterdam, Band: 56, Seiten: 565-604 Weitere Informationen
DOI: 10.1533/9781782422433.2.565
ISBN: 9781782422440

B. Arash, Q. Wang (2013): A review on the application of nonlocal elastic models in modeling of carbon nanotubes and graphenes,  Chapter 2. Part of “Modeling of Carbon Nanotubes, Graphene and Their Composites,” K.I. Tserpes and N. Silvestre, Springer
DOI: /10.1007/978-3-319-01201-8_2
ISBN: 978-3-319-01200-1

Raimund Rolfes, Peter Schaumann, Martin Achmus, Holger Huhn, Ludger Lohaus, Torsten Schlurmann (2013): Ganzheitliches Dimensionierungskonzept für OWEA-Tragstrukturen anhand von Messungen im Offshore-Testfeld alpha ventus - Abschlussbericht GIGAWIND alpha ventus,  Herausgeber: Shaker Verlag. Editor: Rolfes, Raimund and Schaumann, Peter. Address: Aachen. Reihe: .
ISBN: 978-3-8440-1762-5

Nasdala, Lutz; Kempe, Andreas; Rolfes, Raimund (2012): Molecular Dynamic Finite Element Method (MDFEM),  Computational Finite Element Methods in Nanotechnology, Herausgeber: CRC Press, Taylor & Francis Group, Editor: Musa, Sarhan M., Boca Raton, Seiten 331-372

Raimund J. Rolfes (2010): Thermal Analysis,  Encyclopedia of Aerospace Engineering, Herausgeber: John Wiley & Sons, Ltd, Editor: Blockley, R. and Shyy, W., Chichester, Seiten 1755-1768
ISBN: 9780470686652

Tanja Grießmann, Wolf-Jürgen Gerasch, Jörg Rustemeier (2009): Hydroschall beim Bau und Betrieb von Offshore-Windenergieanlagen,  Bauphysik-Kalender 2009. Herausgeber: Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG. Editor: Fouad, Univ-Ing Nabil A.. Seite(n): 681-707
ISBN: 9783433600368

Raimund Rolfes, Gerald Ernst, Matthias Vogler, Christian Hühne (2008): Material and failure models for textile composites,  Mechanical Response of Composites. Herausgeber: Springer. Editor: Camanho, P. P. and Dávila, C. G. and Pinho, S. T. and Remmers, J.. Band: 10. Reihe: 10. Seite(n): 27-56

Raimund Rolfes, Matthias Vogler, Gerald Ernst, Christian Hühne (2008): Strength of Textile Composites in Multiscale Simulation,  Trends in Computational Structures Technology. Herausgeber: Saxe-Coburg Publications. Editor: Topping, B. and Papadrakakis, M.. Address: Stirlingshire, UK. Band: 19. Seite(n): 151-171 Weitere Informationen
ISBN: 978-1-874672-39-5

Johannes Reetz (2007): Damage Detection on Structures of Offshore Wind Turbines using Multiparameter Eigenvalues,  Wind Energy. Herausgeber: Springer Berlin Heidelberg. Editor: Peinke, Joachim and Schaumann, Peter and Barth, Stephan. Seite(n): 301-304 Weitere Informationen
ISBN: 978-3-540-33866-6

Raimund Rolfes, Gerald Ernst (2007): Abschlussbericht DFG SPP 1123: Entwicklung eines finiten 3D-Elementes zur dreidimensionalen Verformungs- und Spannungsberechnung dickwandiger Textilverbunde mit nichtlinearem Materialverhalten,  Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus. Herausgeber: Technische Universität Dresden. Editor: Hufenbach, Werner.
ISBN: 3000221093

Christian Hühne, Raimund Rolfes, Jan Teßmer (2006): Robust Design of Composite Shells: Simulation and Validation,  Computational Science, Engineering & Technology Series'. Herausgeber: Saxe-Coburg Publications. Editor: Topping, B.H.V. and Montero, G. and Montenegro, R.. Address: Stirlingshire, UK. Band: 15. Seite(n): 425-444 Weitere Informationen
ISBN: 1-874672-28-8

K.-H. Elmer, W.-J. Gerasch, T. Neumann, J. Gabriel, K. Betke, R. Matuschek, M. Schultz v. Glahn (2006): Standard Procedures for the Determination and Assessment of Noise Impact on Sea Life by Offshore Wind Farms,  Offshore wind energy: research on environmental impacts. Herausgeber: Springer. Editor: Köller, J. and Köppel, J. and Peters, W..

Christian Schröder, Klaus Thieken, Tim Gerlach, Jann-Eike Saathoff, Nikolai Penner, Andreas Ehrmann, Tanja Grießmann, Martin Achmus, Raimund Rolfes (2017): Schlussbericht zum Verbundprojekt Monitoring SBJ (Überwachung des Suction Bucket Jackets im Offshore Windpark Borkum Riffgrund 1)
DOI: /10.2314/GBV:1011240475

Häfele, J.; Gebhardt, C.G.; Rolfes, R. (2017): Innovative design of a hybrid-type jacket for 10MW turbines,  Hannover

R. Nabavi, E. Jansen & R. Rolfes (2016): Mikrorisse - Ursachen und Folgen für die Langzeitstabilität von PV-Modulen (MIKRO),  Abschlussbericht, Institut für Statik und Dynamik, Leibniz Universität Hannover

S. Scheffler, A. Dean, B. Daum & R. Rolfes (2016): Anwendung eines virtuellen Versuchsstandes zur systematischen numerischen Untersuchung hybrider Fügetechnologien (TransHybrid),  Institut für Statik und Dynamik, Leibniz Universität Hannover

S. Tsiapoki, T. Krause, R. Rolfes, and J. Ostermann (2016): Erweiterung und Erprobung eines Schadensfrüherkennungs- und Eisdetektionssystems für Rotorblätter von Windenergieanlagen - SHM.Rotorblatt: Abschlussbericht zum Forschungsvorhaben der Gottfried Wilhelm Leibniz Universität Hannover,  Institut für Statik und Dynamik (ISD), Institut für Theoretische Nachrichtentechnik und Informationsverarbeitung (tnt), Leibniz Universität Hannover

Christian Schröder, Andreas Ehrmann, Tanja Grießmann, Malte Gottschalk, Patrick Rzeczkowski, Niklas Scholle, Christoph von der Haar, Martin Achmus, Raimund Rolfes, Peter Schaumann, Ludger Lohaus, Steffen Marx (2015): WindBucket - Suction Bucket Gründungen als innovatives und montageschallreduzierendes Konzept für Offshore-Windenergieanlagen,  Abschlussbericht, Leibniz Universität Hannover, Seite 191

Michael Hansen, Boso Schmidt, Benedikt Ernst, Joerg Seume, Mayumi Wilms, Arndt Hildebrandt, Torsten Schlurmann, Martin Achmus, Kirill Schmoor, Peter Schaumann, Sebastian Kelma, Jan Goretzka, Raimund Rolfes, Ludger Lohaus, Michael Werner, Gerhard Poll, Roman Böttcher, Meike Wehner, Felix Fuchs, Stefan Brenner (2015): Probabilistische Sicherheitsbewertung von Offshore-Windenergieanlagen (PSB-OWEA),  Institut: Leibniz Universität Hannover. Weitere Informationen

Bernd Kuhnle, Mathias Stolpe, Anand Natarajan, Tomas Hanis, Jan Häfele, Thomas von Borstel (2014): Innovative Concepts for Bottom Mounted Structures,  Address: Oldenburg, Roskilde, Hannover, Hamburg.

Michael Hansen, Boso Schmidt, Benedikt Ernst, Joerg Seume, Mayumi Wilms, Arndt Hildebrandt, Torsten Schlurmann, Martin Achmus, Kirill Schmoor, Peter Schaumann, Sebastian Kelma, Jan Goretzka, Raimund Rolfes, Ludger Lohaus, Michael Werner, Gerhard Poll, Roman Böttcher, Meike Wehner, Felix Fuchs, Stefan Brenner (2014): Probabilistische Sicherheitsbewertung von Offshore-Windenergieanlagen (PSB-OWEA),  Institut: Leibniz Universität Hannover. Weitere Informationen

Q. Wang, B. Arash (2014): Applications of nanoresonators in nano-sensors and molecular transportation,  IEEE NANO, Waterloo, Canada (invited keynote speech)

Michael Hansen, Boso Schmidt, Benedikt Ernst, Joerg Seume, Mayumi Wilms, Arndt Hildebrandt, Torsten Schlurmann, Martin Achmus, Kirill Schmoor, Peter Schaumann, Sebastian Kelma, Jan Goretzka, Raimund Rolfes, Ludger Lohaus, Michael Werner, Gerhard Poll, Roman Böttcher, Meike Wehner, Felix Fuchs, Stefan Brenner (2013): Probabilistische Sicherheitsbewertung von Offshore-Windenergieanlagen (PSB-OWEA),  Institut: Leibniz Universität Hannover. Weitere Informationen

Tanja Grießmann, Nikolai Penner, Arne Schmoch, Elham Bazrafshan (2013): Ermittlung der Tragfähigkeit historischer und neuerer Geschossdecken mit Hilfe von Schwingungsuntersuchungen

Jörg Rustemeier, Malgorzata Neuber, Tanja Grießmann, Alexander Ewaldt, Andreas Uhl, Manfred Schultz-von Glahn, Klaus Betke, Rainer Matuschek, Andrea Lübben (2012): Konzeption, Erprobung, Realisierung und Überprüfung von lärmarmen Bauverfahren und Lärmminderungsmaßnahmen bei der Gründung von Offshore-WEA,  Institut: gefördert vom Bundesministerium für Umwelt, Naturschutz und Reaktorsicherheit.

Jörg Rustemeier, Tanja Grießmann, Klaus Betke, Joachim Gabriel, Thomas Neumann, Michael Küchenmeister (2012): Erforschung der Schallminderungsmaßnahme Gestufter Blasenschleier (Little Bubble Curtain) im Testfeld alpha ventus,  Address: Hannover, Germany. Institut: gefördert vom Bundesministerium für Umwelt, Naturschutz und Reaktorsicherheit.

Michael Hansen, Boso Schmidt, Benedikt Ernst, Joerg Seume, Mayumi Wilms, Arndt Hildebrandt, Torsten Schlurmann, Martin Achmus, Kirill Schmoor, Peter Schaumann, Alexander Raba, Jan Goretzka, Tanja Grießmann, Raimund Rolfes, Ludger Lohaus, Michael Werner, Gerhard Poll, Janina Brencher, Roman Böttcher, Meike Wehner, Felix Fuchs, Stefan Brenner (2012): Probabilistische Sicherheitsbewertung von Offshore-Windenergieanlagen (PSB-OWEA),  Institut: Leibniz Universität Hannover. Weitere Informationen

Volker Berkhahn, Dirk Bohne, Nabil A. Fouad, Tanja Grießmann, Sebastian Horst, Thomas Kirsch, Hansjörg Kutterer, Ludger Lohaus, Udo Nackenhorst, Torsten Richter, Raimund Rolfes, Peter Schaumann, Steffen Schön, Monika Sester, Thomas Steinborn, Nina Wieczorek (2012): Sensitive und reaktionsfähige Gebäude,  Address: Hannover, Germany. Institut: Fakultät für Bauingenieurwesen und Geodäsie, Leibniz Universität Hannover.

Aret Cezveciyan, Raimund Rolfes, Thomas Pahn (2011): OGOWin - Optimierung aufgelöster Gründungsstrukturen für Offshore Windenergieanlagen Weitere Informationen

Michael Hansen, Boso Schmidt, Benedikt Ernst, Joerg Seume, Mayumi Wilms, Arndt Hildebrandt, Torsten Schlurmann, Martin Achmus, Kirill Schmoor, Peter Schaumann, Anne Bechtel, Rana Meyering, Martin Kohlmeier, Tanja Grießmann, Raimund Rolfes, Ludger Lohaus, Michael Werner, Gerhard Poll, Sebastian Otto, Meike Wehner, Felix Fuchs, Stefan Brenner (2011): Probabilistische Sicherheitsbewertung von Offshore-Windenergieanlagen (PSB-OWEA),  Institut: Leibniz Universität Hannover. Weitere Informationen

Raimund Rolfes, Holger Huhn, Peter Schaumann, Torsten Schlurmann, Ludger Lohaus, Martin Achmus (2011): Ganzheitliches Dimensionierungskonzept für OWEA-Tragstrukturen anhand von Messungen im Offshore-Testfeld alpha ventus,  Address: Hannover, Germany. Institut: Leibniz Universität Hannover. Weitere Informationen

Raimund Rolfes, Lutz Nasdala, Andreas Kempe (2011): Werkstoffe der Zukunft – Wie Faserverbunde nanotechnologisch optimiert werden können,  Institut: Leibniz Universität Hannover. Seite(n): 38-42 Weitere Informationen

Gerrit Haake, Raimund Rolfes (2010): Validierte Strukturmodelle und Systemidentifikation,  Editor: Rolfes, R.. Address: Hannover, Germany. Seite(n): 85-90 Weitere Informationen

Johann Arbocz, Chiara Bisagni, Adriano Calvi, Erasmo Carrera, Ralf Cuntze, Richard Degenhardt, Nunziatino Gualtieri, Herbert Haller, Nicola Impollonia, Marie Jacquesson, Eelco L. Jansen, Hans-Reinhard Meyer-Piening, Huba Oery, Andreas Rittweger, Raimund Rolfes, Günther Schullerer, Guy Turzo, Tanchum Weller, Jaap Wijker (2010): Buckling of Structures,  Institut: ESA Requirements and Standards Division.

Raimund Rolfes, Holger Huhn, Peter Schaumann, Torsten Schlurmann, Ludger Lohaus, Martin Achmus (2010): Ganzheitliches Dimensionierungskonzept für OWEA-Tragstrukturen anhand von Messungen im Offshore-Testfeld alpha ventus,  Address: Hannover, Germany. Institut: Leibniz Universität Hannover. Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Klaus Betke, Joachim Gabriel, Thomas Neumann, Georg Nehls, Miriam Brandt, Ansgar Diederichs, Jan Bachmann (2010): Erforschung und Anwendung von Schallminimierungsmaßnahmen beim Rammen des FINO3-Monopiles,  Institut: gefördert vom Bundesministerium für Umwelt, Naturschutz und Reaktorsicherheit.

Gerrit Haake, Raimund Rolfes (2009): Validierte Strukturmodelle und Systemidentifikation,  Editor: Rolfes, R.. Address: Hannover, Germany. Seite(n): 71-76 Weitere Informationen

Raimund Rolfes, Holger Huhn, Peter Schaumann, Torsten Schlurmann, Ludger Lohaus, Martin Achmus (2009): Ganzheitliches Dimensionierungskonzept für OWEA-Tragstrukturen anhand von Messungen im Offshore-Testfeld alpha ventus,  Address: Hannover, Germany. Institut: Leibniz Universität Hannover. Weitere Informationen

Benedikt Kriegesmann, Christian Hühne, Raimund Rolfes, Jan Teßmer (2008): Imperfection Measurement and Analysis for six Cylindrical Shells made of Composite,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

Raimund Rolfes, Karl-Heinz Elmer, Wolf-Jürgen Gerasch, Jörg Rustemeier (2008): Schallminderung beim Bau von Offshore-Windenergieanlagen,  Address: Karlsruhe, Germany. Institut: Universität Karlsruhe.

Gerrit Haake, Wolf-Jürgen Gerasch, Raimund Rolfes (2007): Validierte Strukturmodelle und Systemidentifikation,  Editor: Zielke, W.. Address: Hannover, Germany. Seite(n): 22-28 Weitere Informationen

Gerrit Haake, Wolf-Jürgen Gerasch, Raimund Rolfes (2007): Validierte Strukturmodelle und Systemidentifikation,  Editor: Zielke, W.. Address: Hannover, Germany. Seite(n): 52-71 Weitere Informationen

K.-H. Elmer, K. Betke, T. Neumann (2007): Standardverfahren zur Ermittlung und Bewertung der Belastung der Meeresumwelt durch Schallimmission von Offshore-Windenergieanlagen – Untersuchung von Schallminderungsmaßnahmen an FINO 2

Werner Zielke, Werner Richwien, Peter Schaumann, Raimund Rolfes, Kim Mittendorf, Martin Blümel, Kerstin Lesny, Gerrit Haake, Wolf-Jürgen Gerasch, Cord Böker (2007): Validierung bautechnischer Bemessungsmethoden für Offshore-Windenergieanlagen anhand der Messdaten der Messplattformen FINO 1 und FINO 2,  Address: Hannover, Germany. Institut: Leibniz Universität Hannover. Weitere Informationen

Christian Hühne, Raimund Rolfes (2006): Robuster Entwurf von Faserverbundschalen,  Editor: Breitbach, E. and Sinapius, M.. Address: Braunschweig, Germany.

Raimund Rolfes, Wolf-Jürgen Gerasch, Gerrit Haake (2006): Validierte Strukturmodelle,  Editor: Zielke, W.. Address: Hannover, Germany. Seite(n): 39-63 Weitere Informationen

Wolf-Jürgen Gerasch, Gerrit Haake (2005): Validierte Strukturmodelle,  Editor: Zielke, W.. Address: Hannover, Germany. Seite(n): 33-47

R. Rolfes, J. Tessmer (2003): Computational Analysis of Composite Lightweight Structures in Aerospace Applications,  Address: Wien.

Tanja Grießmann (2002): Gesamtsystem-Optimierung durch simultane Subsystem-Optimierung anhand des Beispiels Körperschallminimierung von Oberbau und Tunnelkonstruktion in Schienenverkehrstunneln,  Address: Hannover, Germany. Institut: Curt-Risch-Institut.

G. Zardo, J. Baaran, M. König, R. Rolfes (2001): Improved Computation of the Transverse Stress Tensor Components with a 2-D FE Model for CFRP Panels under Impact Loading,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

G. Kuhlmann, R. Rolfes (2000): Die Berechnung dickwandiger Strukturen aus Faserverbundwerkstoff mit Hilfe der Methode der finiten Elemente,  Address: Braunschweig.

G. Kuhlmann, R. Rolfes (2000): TRAVEST- User´s Manual, Course Notes, Exercises,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

J. Ackva, R. Rolfes, U.-C. Ehlert (2000): Rechnerische Untersuchungen zur Realisierbarkeit eines adaptiven Flügels,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes, D. Petersen, J. Block, H.-C- Goetting, U. Hammerschmidt (2000): Experimental Determination of the Convection Coefficient at the Surface of a Composite Aircraft Wing,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

U.-C. Ehlert, J. Ackva, R. Rolfes, L. F. Campanile, H.P. Monner (2000): Untersuchung eines Strukturkonzeptes für den formvariablen Flügel,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

A.S. Herrmann, M. Gaedke, O. Schmidt, J. Kleffmann, R. Zimmermann, A. Pabsch, R. Rolfes (1999): Abschlußbericht über die Arbeitspakete des DLR zur CFK-Druckkalotte,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

H. Sparr, K. Rohwer, R. Rolfes, M. Taeschner (1999): Anwendung einer Schubverformungstheorie höherer Ordnung auf thermo-elastische Plattenprobleme,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

M. Taeschner, H. Sparr, O. Schmidt, R. Rolfes (1998): Calculation of Three-Dimensional Thermo-Mechanical Stresses in Composite Plates and Shells Based on Extended Two-Dimensional Finite Element Method,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes (1998): Berechnung thermischer und mechanisch belasteter Faserverbundplatten,  Institut: TU Dresden, Fakultät für Maschinenwesen.

S. Herold, R. Rolfes, J. Noack (1998): Thermalanalyse eines CFK-Flügels,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

H. Sparr, R. Rolfes (1997): Finite-Elemente-Berechnung dreidimensionaler Thermalspannungen in Faserverbundplatten mit Hilfe einer erweiterten 2D-Methode,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

J. Noack, A de Boer, R. Rolfes, J.F. Heemskerk, A. Pauw, D. Petersen (1997): Technology Developments in Heat Management for Reusable Launch Vehicles, Hybrid Structures Analysis Methods

M. Taeschner, O. Schmidt, R. Rolfes (1997): Finite-Element-Berechnung dreidimensionaler thermischer und mechanischer Spannungen in Faserverbundzylinderschalen mit Hilfe einer erweiterten 2D-Methode,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

P. Netz, R. Rolfes (1997): Technology Developments in Heat Management for Reusable Launch Vehicles, Feasibility Study of Composite Feedlines

R. Rolfes (1997): Thermaluntersuchungen – Integrierte thermisch-mechanische Analyse -,  Editor: Rohwer, K.. Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

A. Dierks, R. Rolfes (1996): Berücksichtigung von Strahlungsrandbedingungen bei der Thermalanalyse von Faserverbundstrukturen mit Hilfe der Methode der finiten Elemente,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

M. Herold, R. Rolfes (1996): Berechnung eines zweischichtigen, dickwandigen Zylinders unter Innendruck und Temperatur,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes (1996): Thermaluntersuchungen,  Editor: Becker, H. and Gaedke, M. and Dudenhausen, W. and Herrmann, A.S. and Piening, M. and Hanselka, H. and Rolfes, R.. Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes, M. Herold (1996): Transverse Stress Calculation in Composite Structures,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Weber, R. Rolfes (1996): Simulation of Delaminations Caused by Impact on Laminated Fibre Composite Plates,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes, R. Weber (1994): Thermische und mechanische Berechnung eines Kaskadenbrenners,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

S. Bienek, R. Rolfes, K. Rohwer (1994): Verbesserung der Ermittlung der Querschubspannungen im Rahmen der Finite-Elemente-Analyse von Faserverbundschalen,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes, K. Schmidt (1993): Thermalanalyse von Strukturteilen aus CFK, Versuch und Berechnung,,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

D. Petersen, J. Block, H. Klein, M. Froevel, R. Rolfes, K. Schmidt (1992): Tank-Rumpf-Integration - Vorschläge -,  Institut: Deutsches Zentrum für Luft- und Raumfahrt. Seite(n): 34

R. Rolfes (1991): Wärmeleitzahlen von UD-Laminaten aus CFK, Berechnung und Messung,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes (1990): A Thermal Lamination Theory for Laminated Composites,  Address: Braunschweig. Institut: Deutsches Zentrum für Luft- und Raumfahrt.

R. Rolfes (1989): Zur Stabilität und Konvergenz gemischter finiter Elemente in der linearen Elastizitätstheorie (Dissertation)

R. Rolfes (1988): Zur Stabilität und Konvergenz gemischter finiter Elemente in der Elastizitätstheorie,  Address: Hannover. Institut: Universität Hannover, Institut für Baumechanik und Numerische Mechanik.

Moritz B., Ole, Wassim, Christina, Klaus, Rainer, Joachim, Andrea Erforschung von Sonartranspondern für Offshore-Windparks und technische Integration in ein Gesamtkonzept: Abschlussbericht zum Forschungsvorhaben,  Buchtitel: Hannover [u.a.]. Journal: Berichtszeitraum: 01.02.2009 - 31.03.2011. Band: 2012.
DOI: Fricke

Moritz, Bernd, Andrea, Joachim Realistische Hydroschallszenarien auf der Basis von Prognosemodellen und Monitoring für den Bau von Offshore-Windparks in der deutschen Nordsee (HyproWind),  Buchtitel: Hannover und Wilhemshaven. Journal: Abschlussbericht zum Forschungsvorhaben FKZ 0325212. Band: 2014.
DOI: Fricke

Clemens Hübler (2019): Efficient probabilistic analysis of offshore wind turbines based on time-domain simulations
DOI: https://doi.org/10.15488/4822

Benedikt Kriegesmann (2012): Probabilistic Design of Thin-Walled Fiber Composite Structures,  Address: Hannover, Germany. Schule: Gottfried Wilhelm Leibniz Universität Hannover. Weitere Informationen

Nina Wieczorek (2011): Semiaktive Schwingungsdämpfung leichter Fußgängerbrückenkonstruktionen,  Address: Hannover, Germany. Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Stephan Zerbst (2011): Global Approach for Early Damage Detection on Rotor Blades of Wind Energy Converters,  Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Tanja Grießmann (2011): Dynamisches Tragverhalten von Stahlbetonbiegeträgern im Experiment und in der Simulation,  Address: Hannover, Germany. Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Gerrit Haake (2010): Systemidentifikation mit Autoregressiven Modellen und Validierung numerischer Strukturmodelle bei Offshore-Windenergieanlagen,  Address: Hannover. Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Gerald Ernst (2009): Multiscale Analysis of Textile Composites - Stiffness and Strength -,  Address: Hannover, Germany. Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Kai-Uwe Schröder (2007): Zur nichtlinearen Berechnung von Stahlbeton- und Verbundbauteilen,  Address: Hannover, Germany. Schule: Gottfried Wilhelm Leibniz Universität Hannover.

Christian Hühne (2005): Robuster Entwurf beulgefährdeter, unversteifter Kreiszylinderschalen aus Faserverbundwerkstoff,  Schule: Technische Universität Carolo-Wilhelmina zu Braunschweig, Institut für Faserverbundleichtbau und Adaptronik, Fakultät für Maschinenbau.

Franziska Müller, Clemens Hübler, Raimund Rolfes (2021): A comprehensive study of meta models for simulation models of offshore wind turbines,  Wind Energy Science Conference, 25-28 May. Leibniz University Hannover

Marlene Bruns, Helge Jauken, Clemens Hübler, Raimund Rolfes (2021): Presentation of a measurement campaign inside a rotor blade of an operating multi-megawatt offshore wind turbine using a fiber-optic measurement system,  Wind Energy Science Conference, 25-28 May. Leibniz University Hannover

Clemens Hübler (2020): Probabilistic Analyses of Wind Turbines,  16th EAWE PhD Seminar, Porto, Portugal

F. Müller, C. Hübler, R. Rolfes (2020): Comprehensive investigation of meta-models for fatigue load approximation of offshore wind turbines,  16th EAWE PhD Seminar, Porto, Portugal

J. Hörmeyer, C. Hübler, T. Bohne, R. Rolfes (2020): Variability of sound emission in a turbulent atmosphere,  18th International Symposium on Long Range Sound Propagation - Virtual Edition

S. Martens, T. Bohne, R. Rolfes (2020): Distance-dependent refraction effects in the sound propagation of wind turbines,  18th International Symposium on Long Range Sound Propagation (LRSP) - Virtual Edition

A. Mousavi, B. Arash, R. Rolfes (2019): Mechanical properties of boehmite nanoparticle reinforced epoxy nanocomposites: Insights from coarse-grained simulations,  Acting Principles of Nano-Scaled Matrix Additives for Composite Structures, WORKSHOP-OCTOBER 11, 2019, Berlin

Anilkumar P. M., B. N. Rao, A. Haldar, E. L. Jansen and R. Rolfes (2019): Effect of piezoelectric fibre alignment on morphing of bistable composites,  29th International Workshop on Computational Mechanics of Materials (IWCMM29), Dubrovnik, Croatia

F. Müller, C. Hübler, R. Rolfes (2019): Well-founded meta modeling of wind turbines,  15th EAWE PhD Seminar on Wind Energy, Nantes, Frankreich

G. Gottlieb, B. Daum, S. Scheffler, R. Rolfes (2019): The effect of voids on the mechanical behavior of UD-plies,  7th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2019), Girona, Spain

J. Hörmeyer, C. Hübler, T. Bohne, R. Rolfes (2019): Uncertainties in atmospheric sound propagation depending on source height,  15th EAWE PhD Seminar on Wind Energy, Nantes, Frankreich

M. Brod, C. Gerendt, A. Dean, R. Rolfes (2019): Modeling and Simulation of Fatigue Damage behavior in Carbon Composites under Tension-Compression Load Reversals,  CCeV-Thementag „Ermüdung und strukturelle Integrität von Composites“, St. Valentin, Austria

N. Safdar, B. Daum, S. Scheffler, R. Rolfes (2019): Experimental characterization of fibre waviness and probabilistic compressive failure surface of continuous unidirectional fiber reinforced composites,  7th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2019), Girona, Spain

R. Unger, W. Exner, B. Arash, R. Rolfes (2019): Prediction of the Viscoelastic Properties of Thermosetting Polymers from Molecular Dynamics Simulations,  15th US National Congress on Computational Mechanics (USNCCM15), Austin, Texas, USA

A. Dean, H. Madhusoodanan, C. Gerendt, M. Brod, E. Jansen & R. Rolfes (2018) (2018): Applications of a physically based fatigue damage model for composite and hybrid structures.,  FULLCOMP Workshop 2018, Bordeaux, France

A. Dean, R. Rolfes, B. A. Behrens, S. Hübner, A. Chugreev, N. Grbic (2018): Parametric Study and Virtual Testing of Hybrid Metal-Composites Clinching Joints,  8th International Conference on Tribology in Manufacturing Processes & Joining by Plastic DeformationAt: Elsinore, Denmark

Aamir Dean, Raimund Rolfes (2018): FE Simulation Framework for the Virtual Testing of Hybrid Metal-Composites Clinching Joints,  IRTG 1627 annual Workshop, Roscoff, France

C. Gerendt, R. Rolfes (2018): Fatigue Damage Modelling of Composites: Application to FML Joints,  IRTG PhD Winter School 2018, Bad Herrenalb (Germany)

C. Hübler, A. Stang, R. Rolfes, P. Schaumann (2018): Probabilistic Calculation of the Remaining Substructural Lifetime Based on Strain Measurements,  IEA Wind Task 11, Topical Expert Meeting # 93, Roskilde, Dänemark

C. Hübler, J.-H. Piel, C. Stetter, C. G. Gebhardt, M. H. Breitner, R. Rolfes (2018): Effects of the Support Structure Design on the Economic Viability of Offshore Wind Projects: an Interdisciplinary Analysis,  Offshore Wind R&D Conference 2018 - Bremerhaven

Clemens Hübler, Benedikt Hofmeister (2018): Turbine Modelling,  14th eawe PhD seminar (invited lecture), 18-20 September 2018, Vrije Universiteit Brussel, Belgien

J. Häfele, C. G. Gebhardt, R. Rolfes (2018): Optmization of jacket substructures considering detailed cost and load Assumptions,  Offshore Wind R&D Conference 2018, Bremerhaven, Germany

J. Hörmeyer, S. Martens, R. Rolfes (2018): Atmosphärische Schallausbreitung von Windenergieanlagen, Ringvorlesung: "Faszination Akustik".,  Ringvorlesung: "Faszination Akustik", Braunschweig

M. Brod, G. Just, E. Jansen, I. Koch, R. Rolfes and M. Gude (2018): Layer-based fatigue damage modelling and experimental validation for carbon fibre reinforced plastics under different stress ratios.,  6th European Conference on Computational Mechanics (ECCOMAS), Glasgow, UK

N. Safdar, R. Rolfes, O. Allix (2018): Probabilistic Compressive Failure Surfaces under Plainstress for the Unidirectional Fibre Reinforced Composites.,  IRTG1627 annual Workshop, Roscoff, France

R. Unger (2018): Neue Materialien für die Rotorblattentwicklung,  Tag der Energieforschung, Leibniz Universität Hannover

R. Unger, J. Fankhänel, B. Arash, B. Daum, R. Rolfes (2018): A Molecular Modelling Approach for the Crosslinking of Nanoparticle-Reinforced Epoxy Resins and its Effect on Predicted Mechanical Properties,  13TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS (WCCM), New York, USA

A. Dean, R. Rolfes, A. Behrens, A. Bouguecha, S. Hübner, C. Bonk & N. Grbic (2017): Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature,  20th International ESAFORM Conference on Material Forming (ESAFORM ), Dublin, Ireland

A.Haldar, E.Jansen, R. Rolfes (2017): Snap-through of Multistable Variable Stiffness Composites using Piezoelectric Actuators,  Abstract in Proceedings / Book of Abstracts of: 20th International Conference on Composite Structures, Paris, France

Andreas Ehrmann, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): A Hierarchical Clustering Approach for Jacket Substructures for Offshore Wind Farms according to Location-Dependent Environmental Conditions,  Wind Energy Science Conference, Lyngby

Andreas Ehrmann, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Hierarchical Clustering of Jacket Substructures for Offshore Wind Farms according to Location-Dependent Environmental Conditions,  Wind Energy Systems Engineering Workshop, Roskilde

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Development of a comprehensive data basis of scattering environmental conditions for offshore wind turbines,  Wind Energy Science Conference, Kopenhagen, Dänemark

Clemens Hübler, Jan-Hendrik Piel, Michael H. Breitner, Raimund Rolfes (2017): How Do Structural Designs Affect the Economic Viability of Offshore Wind Turbines? An Interdisciplinary Simulation Approach,  International Conference on Operations Research, Berlin, Deutschland

Cristian Guillermo Gebhardt, Clemens Hübler, Karsten Schröder, Raimund Rolfes (2017): Coupled dynamics of wind turbines: a multiple-perspective approach,  IEA Wind Task 11, Topical Expert Meeting # 88, Edinburgh, Schottland

H. Madhusoodanan, E. L. Jansen, R. Rolfes (2017): SIMULATION OF DAMAGE BEHAVIOR IN GFRPS IN THE VERY HIGH CYCLE REGIME,  Conference on Very High Cycle Fatigue (VHCF7)

Jan Häfele, Clemens Hübler, Cristian G. Gebhardt, Raimund Rolfes (2017): An effective soil-structure interaction consideration approach for time domain simulations of offshore wind turbines,  Präsentation, 7. GIGAWIND Symposium, Hannover

Johannes Fankhänel, Benedikt Daum, Eelco Jansen und Raimund Rolfes (2017): Modellierung und Simulation des thermischen und mechanischen Verhaltens von Nanokompositen,  FOR2021-Workshop, Clausthal, Germany

Johannes Fankhänel, Benedikt Daum, Raimund Rolfes (2017): Numerical investigation of particle size and agglomeration effects on the mechanical properties of boehmite nanoparticle reinforced polymers,  20th International Conference on Composite Structures (ICCS), Paris, France

M.Akterskaia, E.Jansen, R.Rolfes (2017): Debonding Analysis of Stiffened Composite Panels Using a Two-Way Global-Local Loose Coupling Approach,  Abstract in Proceedings / Book of Abstracts of: 20th International Conference on Composite Structures, Paris, France

M.Akterskaia, E.Jansen, S.Hühne, R.Rolfes (2017): Progressive Failure Analysis of Stiffened Composite Panels with Skin-Stringer Debonding and Intralaminar Damage using a Two-Way Loose Coupling Approach,  Abstract in Proceedings / Book of Abstracts of: International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes, France

Nikolai Penner, Christoph Tomann (2017): Global Condition Parameters and Offshore Exposure Tests of a Mineral Corrosion Protection System,  Präsentation, 7. GIGAWIND Symposium, Hannover

Nikolai Penner, Raimund Rolfes (2017): Soil Stiffness Evaluation and Bearing Behavior of a Suction Bucket Jacket Prototype,  International Modal Analysis Conference (IMAC XXXV)

R. Unger, B. Daum, U. Braun, R. Rolfes (2017): Experimentally calibrated modeling technique for the cross linking mechanism of epoxy resin and its influence on mechanical properties,  20th International Conference on Composite Structures (ICCS), Paris, France

R. Unger, C. Gerendt, B. Daum, E. Jansen, R. Rolfes, C. Ueing, N. Englisch, F. Sayer, W. Exner, T. Mahrholz, P. Lorsch, P. Wierach (2017): Lebensdauererhöhung und Leichtbauoptimierung durch nanomodifizierte und hybride Werkstoffsysteme im Rotorblatt,  Hannover Messe, Forum Industrial Supply, 28. April 2017

Tobias Bohne und Raimund Rolfes (2017): Was Luftblasen und der Schweinswal mit der deutschen Energiewende zu tun haben,  Ringvorlesung: "Faszination Akustik", Braunschweig

A. Dean, J. Reinoso, S. Sahraee & R. Rolfes (2016): Finite element analyses and simulation of the failure of short-fiber reinforced thermoplastics and aluminium blanks by clinching,  IRTG 1627 Workhop, Filderstadt, Germany

A. Dean, S. Sahraee, J. Reinoso & R. Rolfes (2016): A novel finite deformation model for short fiber reinforced composites,  Multiscale Modeling of Heterogeneous Structures (MUMO), Dubrovnik, Croatia

A.Haldar, J.Reinoso, E.Jansen, R. Rolfes (2016): Finite Element Modeling of Multistable Variable Stiffness Composites in Morphing Rotor Blades,  Multiscale Modeling of Heterogeneous Structures, Dubrovnik

A.Haldar, J.Reinoso, E.Jansen, R. Rolfes (2016): Multistable Variable Stiffness Composites for Adaptive Structures: A Parametric Study,  2nd International conference on mechanics of composites, Porto

A.Haldar, S.Garmabi, M. Bishara, E.Jansen, R. Rolfes (2016): Structural Analysis Tools and Concepts for Rotor Blades with Morphing Trailing Edge,  Wissenschaftstag - Funktionsleichtbau für die Windenergie Anforderungen, Möglichkeiten, Nutzen, DLR-Braunschweig

Alexander D. Meurer, Christian Gerendt and Raimund Rolfes (2016): Identification of Essential Imperfection Patterns for Axially Compressed Composite Cylindrical Shells,  ECCOMAS Congress 2016

B. Arash, B. J. Thijsse, A. Pecenko, A. Simone (2016): Thermal degradation of polyamide 6,6: A reactive molecular dynamics simulation study,  Materials Innovation Institute (M2i) Conference, Utrecht, the Netherlands

H. Madhusoodanan, E. L. Jansen, R. Rolfes (2016): 3D simulation of damage behavior of GFRPs in the very high cycle regime,  Materials Science and Engineering Conference (MSE ), Darmstadt, Germany

M.Akterskaia, E.Jansen, S.Hühne, R.Rolfes (2016): Efficient Postbuckling Progressive Failure Analysis of Stiffenened Composite Panels Using a Two-Way Loose Coupling Approach,  Abstract in Proceedings / Book of Abstracts of: 19th International Conference on Composite Structures, Porto, Portugal

Majeed Bishara, Mehdi Garmabi, Eelco Jansen, Raimund Rolfes (2016): Tools for Detailed Strength and Stability Analysis of Smart Rotor Blades,  Buchtitel: Abstract in Book of Abstracts of the SmartBlades Conference. Address: Stade, Germany.

Michaela Herr, Alexandre Suryadi, Susanne Martens (2016): Comparative Noise Measurements at Serrated and Porous Trailing-Edge Modifications,  Serration Technology on Airfoil: Unsteady Aerodynamic and Aeroacoustics, Leiden, Niederlande

Michaela Herr, Roland Ewert, Benjamin Faßmann, Christof Rautmann, Susanne Martens, Claas-Hinrik Rohardt, Alexandre Suryadi (2016): Low-Noise Technologies for Wind Turbine Blades,  WindEurope Tech Workshop, Wind Turbine Sound, Danzig, Polen

S. Scheffler, A. Dean & R. Rolfes (2016): Prediction of strength and global failure behavior of complex joint configurations in composites,  European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Crete Island, Greece

A. Dean, J. Reinoso, M. Vogler, R. Rolfes, A. Behrens, A. Bouguecha, M. Vucetic & N. Grbic (2015): Numerische und experimentelle Untersuchungen zum Versagen beim Clinchen von kurzfaserverstärkten Thermoplasten mit Aluminium-Blechwerkstoffen,  SPP1640 Workshop, Hanau, Germany

A. Dean, J. Reinoso, S. Sahraee & R. Rolfes (2015): A thermodynamically consistent framework to couple microplane damage and plasticity models,  IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC15), Paris, France

Eelco Jansen, Marco Amabili, Tanvir Rahman, Raimund Rolfes (2015): Multi-mode Dynamic Stability Analysis of Laminated Cylindrical Shells under Dynamic Axial Loading,  Buchtitel: Abstract in Book of Abstracts of the International Conference on Advances in Vibrations. Address: Porto, Portugal.

Eelco Jansen, Paul Weaver, Tanvir Rahman, Simon White, Raimund Rolfes (2015): Efficient Models for Initial Post-Buckling Analysis of Variable Stiffness Curved Panels,  Buchtitel: Abstract in Book of Abstracts of the 18th International Conference on Composite Structures (ICCS18). Address: Lisbon, Portugal. Weitere Informationen

Eelco Jansen, Pedro Ribeiro, Tanvir Rahman, Raimund Rolfes (2015): Effect of Boundary Conditions on Nonlinear Vibrations of Variable Stiffness Composite Plates,  Buchtitel: Abstract in Book of Abstracts of the 18th International Conference on Composite Structures (ICCS18). Address: Lisbon, Portugal. Weitere Informationen

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2015): INITIAL POST-BUCKLING OF COMPOSITE CYLINDRICAL SHELLS INCLUDING LOCALIZED PATTERNS VIA MULTI-MODE ANALYSIS,  Buchtitel: Abstract in Proceedings of V ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2015). Address: Bristol, UK.

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2015): MULTI-MODE REDUCED ORDER APPROACH FOR DYNAMIC POST-BUCKLING ANALYSIS OF COMPOSITE PANELS,  Buchtitel: Abstract in Proceedings of XXIII Italian Association of Aeronautics and Astronautics Conference (AIDAA 2015). Address: Torino, Italy.

Eelco L. Jansen, Haim Abramovich, Raimund Rolfes (2015): IMPROVING THE VIBRATION CORRELATION TECHNIQUE FOR SHELLS USING ANALYSIS TOOLS,  Buchtitel: Extended Abstract in Proceedings of 3rd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Address: Braunschweig, Germany. Weitere Informationen

Eelco L. Jansen, Tanvir Rahman, Raimund Rolfes (2015): TOWARDS MODE SELECTION CRITERIA FOR MULTI-MODE INITIAL POSTBUCKLING ANALYSIS OF COMPOSITE CYLINDRICAL SHELLS,  Buchtitel: Extended Abstract in Proceedings of 3rd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Address: Braunschweig, Germany. Weitere Informationen

Ehrmann, Andreas; Thieken, Klaus; Rolfes, Raimund; Achmus, Martin (2015): Comparing a Jacket Substructure with Suction Bucket Foundation to a Pile Foundation,  RAVE- Offshore Wind R&D Conference, Bremerhaven

Nikolai Penner, Raimund Rolfes (2015): Zur Auswertung dynamischer Messdaten des Jacket-Prototypen mit Suction Buckets im Offshore-Windpark Borkum Riffgrund,  Baustatik-Baupraxis Forschungskolloquium

R. Nabavi, J. Reinoso, E. Jansen, R. Rolfes (2015): Failure analysis approach for poly-crystalline silicon in PV module four-line bending test,  2nd International Workshop: Impact of mechanical and thermal loads on the long term stability of PV modules, Hannover, Germany

Raimund Rolfes, Johannes Fankhänel, Andreas Kempe (2015): Computergestützte Materialentwicklung von Nanocomposites,  BWG Plenarversammlung, Braunschweig, Germany

Raimund Rolfes, Johannes Fankhänel, Andreas Kempe (2015): Modeling and simulation framework for the mechanical response of nano-composites,  ENS-LMT, Cachan, France

S. Scheffler, A. Dean & R. Rolfes (2015): On the analysis of composite bolted joints using a new progressive damage approach,  5tth ECCOMAS Conference on Mechanical Response of Composites (ECCOMAS), Bristol, UK

Seyedmehdi Garmabi, Majeed Bishara, Eelco Jansen, Raimund Rolfes (2015): Towards Efficient Tools for Strength and Vibration Analysis of Large Rotor Blades,  Buchtitel: Presentation at Smart Blades Symposium. Address: Oldenburg, Germany.

Eelco Jansen, Raimund Rolfes (2014): MODAL INTERACTION CHARACTERISTICS OF AN AXIALLY LOADED COMPOSITE CYLINDRICAL SHELL USING KOITER'S IMPERFECTION SENSITIVITY ANALYSIS,  Buchtitel: Abstract in Proceedings of 11th World Congress on Computational Mechanics (WCCM XI). Address: Barcelona, Spain. Weitere Informationen

Majeed Bishara, Raimund Rolfes (2014): Hybrid Micro Meso Modeling Approach to Predict Compressive Failure of Composites,  Buchtitel: Abstract in Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). Address: Barcelona, Spain. Weitere Informationen

R. Nabavi, J. Reinoso, E. Jansen & R. Rolfes (2014): Computational analysis of inter-granulare failure in poly-crystalline silicon solar cells,  29th European Photovoltaic Solar Energy Conference, Amsterdam, Netherlands

Raimund Rolfes, Andreas Kempe, Johannes Fankhänel, Lutz Nasdala, Eelco Jansen (2014): MDFEM-Multiskalensimulationen zur Ermittlung der mechanischen Eigenschaften von Nanokompositmaterialien,  Symposium Nanotechnologie für Kunststoffverbunde, Braunschweig, Germany

Seyedmehdi Garmabi, Eelco Jansen, Raimund Rolfes (2014): Towards Vibration Analysis Tools for Smart Rotor Blades,  Buchtitel: Extended Abstract in Proceedings of 10th PhD Seminar on Wind Energy in Europe. Address: Orléans, France. Weitere Informationen

Sina Hühne, José Reinoso, Eelco Jansen, Raimund Rolfes (2014): Application of a two-way loose coupling procedure to a stiffened composite panel,  Buchtitel: Abstract in Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). Address: Barcelona, Spain. Weitere Informationen

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2013): Nonlinear Vibration Analysis of Variable Stiffness Composite Plates using a Finite Element Integrated Perturbation Method,  Buchtitel: Abstract in Proceedings of 17th International Conference on Composite Structures (ICCS17). Address: Porto, Portugal.

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2013): Nonlinear Vibration Analysis of Composite Cylindrical Shells Using Semi-Analytical and Finite Element Reduced-Order Models,  Buchtitel: Abstract in Book of Abstracts of the 4th Canadian Conference on Nonlinear Solid Mechanics. Address: Montreal, Canada.

Eelco L. Jansen, Tanvir Rahman, Alexander Meurer, Raimund Rolfes (2013): Postbuckling Analysis of Composite Stiffened Panels under Dynamic Compressive Loading,  Buchtitel: Abstract in Proceedings of the 17th International Conference on Composite Structures (ICCS17). Address: Porto, Portugal.

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2013): Modelle zur Berechnung der Schallminderung von Blasenschleiern,  Buchtitel: AK Hydroschall. Address: Hamburg, Germany.

Andreas Kempe, Lutz Nasdala, Raimund Rolfes (2012): Simulating Size-Dependency of the Tensile Modulus of Alumina/Epoxy Nanocomposites using the Molecular Dynamic Finite Element Method,  Buchtitel: Abstract in Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures. Address: Politecnico di Torino, Italy. Weitere Informationen

Eelco Jansen, Tanvir Rahman, Raimund Rolfes (2012): Post-Buckling Analysis of Composite Stiffened Panels under Dynamic In-Plane Loading,  Buchtitel: Abstract in Proceedings of 3rd Aircraft Structural Design Conference. Address: Delft, the Netherlands.

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2012): Schallminderungskonzept Blasenschleier,  Buchtitel: DAGA 2012. Address: Darmstadt, Germany.

Jörg Rustemeier, Tanja Grießmann, Raimund Rolfes (2012): Schallimmissionen von Offshore-WEA und Minderung durch Blasenschleier,  Buchtitel: 2. VDI-Fachkonferenz: Schall und Schallemissionen von Windenergieanlagen. Address: Hamburg, Germany.

Steffen Czichon, Eelco Jansen, Raimund Rolfes (2012): DETERMINATION OF LOCAL FIBER UNDULATION CAUSED BY VOID INCLUSIONS IN CARBON FIBER REINFORCED POLYMERS USING COMPUTATIONAL FLUID DYNAMICS,  Buchtitel: Abstract in Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures. Address: Torino, Italy. Weitere Informationen

Benedikt Kriegesmann, Eelco L. Jansen, Raimund Rolfes (2011): Semi-Analytical Probabilistic Analysis of Axially Compressed Stiffened Composite Panels,  Buchtitel: Abstract in Proceedings of the 16th International Conference on Composite Structures (ICCS16). Address: Porto, Portugal. Weitere Informationen

Eelco L. Jansen, Tanvir Rahman, Zafer Gürdal (2011): Dynamic Stability Analysis of Shells Using a Finite Element Based Reduction Method,  Buchtitel: Extended Abstract in Proceedings in Applied Mathematics and Mechanics 11, 229 – 230, Proceedings of GAMM 2011. Address: Graz, Austria. Weitere Informationen

Raimund Rolfes, Matthias Vogler, Steffen Czichon, Benedikt Kriegesmann, Heiko Krüger, Eelco Jansen (2011): State of the Art Simulation of Composite Structures,  Buchtitel: Slides in Online Proceedings of LS-DYNA Forum 2011. Address: Filderstadt, Germany. Weitere Informationen

Raimund Rolfes, Steffen Czichon, Benedikt Kriegesmann, Heiko Krüger, Matthias Vogler, Eelco Jansen (2011): Analysis Tools for Robust and Cost Efficient Design of Composite Structures,  Buchtitel: Abstract in ICCES International Conference on Computational & Experimental Engineering and Sciences, 16 (3), 69-70, Proceedings of ICCES 2011. Address: Nanjing, China. Weitere Informationen

Sina Berg, David Chrupalla, Luise Kärger, Eelco L. Jansen, Raimund Rolfes (2011): Application of a two-way multiscale analysis for composite structures in Abaqus,  Buchtitel: Abstract in Proceedings of the 16th International Conference on Composite Structures (ICCS16). Address: Porto, Portugal. Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Malgorzata Neuber, Raimund Rolfes (2011): Unterwasserschall bei der Errichtung von Offshore-Windenergieanlagen,  Buchtitel: VDI-Fachkonferenz: Schall und Schallemissionen von Windenergieanlagen. Address: Hamburg, Germany.

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2011): Einsatz von Blasenschleiern zur Reduktion des Rammschalls im Wasser,  Buchtitel: Forum Geotechnik und Baubetrieb. Address: Institut für Geotechnik und Baubetrieb. Technische Universität Hamburg-Harburg..

Tanvir Rahman, Eelco L. Jansen, Zafer Gürdal (2011): IMPERFECTION SENSITIVITY ANALYSIS OF COMPOSITE SHELLS USING A FINITE ELEMENT VERSION OF KOITER'S METHOD,  Buchtitel: Abstract in Proceedings of 16th International Conference on Composite Structures (ICCS16). Address: Porto, Portugal. Weitere Informationen

Andreas Kempe, Lutz Nasdala, Raimund Rolfes (2010): Atomistische Modellierung und Simulation von Nanokompositmaterialien,  Buchtitel: Abstract in Faserverbundwerkstoffe – Technologie & Anwendung, Tagungsband 16. Nationales Symposium SAMPE Deutschland e.V., 43-45, Institut für Polymerwerkstoffe und Kunststofftechnik TU Clausthal. Address: Clausthal-Zellerfeld, Germany. Weitere Informationen

Steffen Czichon, Raimund Rolfes (2010): Development of a mesomechanical model for the assessment of void inclusions,  Buchtitel: Abstract in Proceedings of the ECCOMAS IV European Conference on Computational Mechanics. Address: Paris, France. Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2010): Research on mitigation measures at alpha ventus,  Buchtitel: Pile driving in offshore windfarms: Effects on harbor porpoises, mitigation measures and standards.Workshop at Ozeanum, organized by the Federal Maritime and Hydrographic Agency (BSH). Address: Stralsund, Germany. Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2010): Erfahrung bei der Rammschallminderung durch Blasenschleier bei der Errichtung des Offshore-Testfeldes Alpha Ventus,  Buchtitel: 20. Symposium: Aktuelle Probleme der Meeresumwelt. Address: Hamburg, Germany.

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2010): Bubble curtains as a protective measure for marine mammals in theory and practice,  Buchtitel: Conference MIREMAR (Minimizing Risks for the Environment in Marine Ammunition Removal in the Baltic and North Sea), 16-18 November 2010. Address: Neumünster, Germany.

Raimund Rolfes, Matthias Vogler, Benedikt Kriegesmann (2009): Novel trends in failure analysis of composite structures,  Buchtitel: Abstract in ICCES International Conference on Computational & Experimental Engineering and Sciences, 12 (2), 43-44, Proceedings of ICCES 2009. Address: Phuket, Thailand. Weitere Informationen

Tanja Grießmann, Jörg Rustemeier, Malgorzata Neuber, Raimund Rolfes (2009): Research in the field of hydrosound reduction during the construction of offshore windfarms,  Buchtitel: International workshop: Underwater noise and Offshore Wind Farms. Address: Hamburg, Germany.

Tanja Grießmann, Jörg Rustemeier, Malgorzata Neuber, Raimund Rolfes (2009): Methods to reduce noise from pile driving for offshore installations,  Buchtitel: 2nd International Conference on Progress in Marine Conservation in Europe. Address: Stralsund.

Tanja Grießmann, Jörg Rustemeier, Malgorzata Neuber, Wolf-Jürgen Gerasch, Raimund Rolfes (2009): Forschung auf dem Gebiet Minderung von Hydroschallimmissionen beim Bau von Offshore-Windenergieanlagen,  Buchtitel: Offshore-Windenergie-Kolloquium. Address: Hannover, Germany.

Tanja Grießmann, Jörg Rustemeier, Raimund Rolfes (2009): Forschungsplattform FINO3 – Einsatz des großen Blasenschleier,  Buchtitel: 19. Symposium: Aktuelle Probleme der Meeresumwelt. Address: Hamburg, Germany. Weitere Informationen

Steffen Czichon (2008): Versagen eines Faserverbundwinkels unter Berücksichtigung des transversal isotropen Schädigungsmodells nach Puck,  Buchtitel: ANSYS Conference and CADFEM User's Meeting 2008. Address: Darmstadt.

Tanja Grießmann (2008): Effizienter Materialeinsatz bei schwingenden Tribünenträgern,  Buchtitel: Ressourcenschonendes Bauen und Bausubstanzerhaltung durch Optimierung der Gebrauchstauglichkeit und Verlängerung der Lebensdauer von Bauwerken. Tagung der Deutschen Bundesstiftung Umwelt. Address: Osnabrück, Germany.

Raimund Rolfes, Gerald Ernst, Matthias Vogler, Christian Hühne (2007): Material and failure models for textile composites,  Buchtitel: Abstract in Proceedings of ECCOMAS Thematic Conference on Mechanical response of composites. Address: Porto, Portugal.

Tanja Grießmann, Wolf-Jürgen Gerasch, Raimund Rolfes (2006): Einsatz faseroptischer Sensoren bei Messungen an dynamisch beanspruchten Stahlbetonbalken,  Buchtitel: Forschungskolloquium 2006 Baustatik – Baupraxis. Address: Obergurgl, Austria.

C. Hühne, T. Niederstadt, R. Rolfes (2005): Realisierung des DAAR-Rings in Faserverbundbauweise für die Ariane V Trägerrakete,  Buchtitel: 23. CADFEM Users' Meeting. Address: Bonn, Germany.

Gerrit Haake (2005): Validation of numeric models of offshore research platforms on the base of structural measurement data,  Buchtitel: 1. EAWE PhD Seminar on Wind Energy in Europe. Address: Athens, Greece.